Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

Intercom help, No Power cable at wall

  • 28-09-2020 2:58pm
    #1
    B-D-P--
    Registered Users Posts: 1,167 ✭✭✭


    Hi All
    Attached a crude drawing.

    I plan to put a intercom system in at the electric gates,

    I have a cable running from gate to a Comms box in my study, This is fine.
    But all of the systems I see need a power source at the receiver.

    I have Ran a cat6 cable to the Wall by the front door.

    But now I'm stuck as to how I will get the 12V there.

    Is there systems where the CPU is in coms cabinet but the Receiver is on wall.
    This was my thoughts at first but I dont see them online at all?

    coms-diagram.png

    This is the setup I wanted to do, but never planned for the power.
    2d9c4056-91ff-48bd-b8db-be3c55c59f42.jpg

    really pi$$ed off with myself on this 1.

    Of course I can have the receiver in the office, but its not the same.


Comments

Advertisement