Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

First Router Recommendations?

  • 25-10-2019 2:53pm
    #1
    Sleepy
    Registered Users Posts: 24,143 ✭✭✭✭


    I'm starting to get into woodworking and am looking to expand my tool collection with a router. I'd be looking at using one for rounding edges, cutting dados, morticing, dovetailing etc. so would like one with as much versatility as possible and like the idea of getting one which I could find a compatible router table for a little bit down the line.

    I'm working from a budget of 60 to 80 euros which I'm hoping is enough to get me a decent model for DIY use.

    Any recommendations or tips of makes/models to avoid?


Comments

  • #2
    recipio
    Registered Users Posts: 2,804 ✭✭✭recipio


    Sleepy wrote: »
    I'm starting to get into woodworking and am looking to expand my tool collection with a router. I'd be looking at using one for rounding edges, cutting dados, morticing, dovetailing etc. so would like one with as much versatility as possible and like the idea of getting one which I could find a compatible router table for a little bit down the line.

    I'm working from a budget of 60 to 80 euros which I'm hoping is enough to get me a decent model for DIY use.

    Any recommendations or tips of makes/models to avoid?

    I think its a rookie mistake to buy budget routers - they are ok for a while but feel rough in use ( don't forget they get up to 30,000 rpm ) and the electronics can fail. A quality router like the Makita RTO700/CX can be had on Amazon for 104 stg and will give a lifetime of satisfaction.
    If you are getting a router table you will probably want to spring for a second router as well as you will soon get tired of switching the router in and out of the table.:eek: Lastly, you will soon accumulate a lot of 1/4" bits but make sure the collet can take 8 mm as well as occasionally you will need to chuck an 8 mm bit.


Advertisement