Originally Posted by greenbamboo
Hi all, I am currently putting a solis 9kw insert stove in. I have a wooden surround on my open fireplace. The clearance to combustibles on the manual says 250 mm away from sides but my clearance to the wood is 200mm. Would I get away with this or do I definitely have to change the wooden surround if im only 50mm off like that?
DECLARATION OF PERFORMANCE
(ln accordance with Annex lll of Regulation (EU) 305t2011)
1. ldentification code of Product type: SOlN900SE
2. rype: STANLEY SOLIS INSET 900 WOOD BURNING STOVE
3. lntended use of the construction product
Space Heating in residential buildings with no supply of hot water.
4. Name, contact address of the manufacturer
Manufactured at, Unit 401-403, IDA lndustrial Estate, Cork Road, Waterford, lreland By Waterford Stanley part of the AGA RANGEMASTER group.
5 Not applicable
6. System 3 assessment and verification of constancy of performance.
Product certified by:
Rhein-Ruhr Feuerstdtten Pr0fstelle GmbH body no NB 1625 assessed the product against BS EN
1 324 0 :200 I AC :20 06 I A2:20 0 4 I AC :20 07
Performed under system 3 and issued test report no RRF - DF DP 17 4687
9. Declared Performance
Harmonized technical specification BS EN 13240:2001/AC:2006 &BS EN
13240 200 | / A2 :200 4 I AC :2007
Essential characteristics Performance (wood)
Reaction to fire A 1 A1
Minimum distances, in mm
Distance to combustible materials
Risk of burning fuel falling out Pass
Emission of combustible oroducts CO t 0.09 o/ol
Cleanability Pass Pass
Maximum operating pressure N/A
T [ 298'C]
Mechanical resistance (to carry a
Nominal heat output 9kw space
Room heatinq output 9kw space
Water heating output N/A
Energy efficiency n 80 %l