We moved in to our house over a year ago. We have oil fired heating system with solid fuel stove as well. We've been using oil for heating mostly which works fine in the house, but this year we decided not to buy oil but use coal instead.
Since we stopped using oil it seems that the stove isn't heating the house at all, only few rads downstairs are warm, the kitchen is hot from the stove burning (not rads) and no heat upstairs. The water isn't heating up either. We had the coal burning from 2pm to 9pm yesterday and still had to put water on to use the shower.
There is a zone heating in the house and around 20 rads. The Stanley stove we have it looks like Erin model (looks exactly like it). I asked the landlord before how to use it and he said to put the oil on first and then start the fire, after its nicely going switch off the oil and the stove should maintain the heat. But that doesn't happen either.
Is the stove big enough to warm up 20 rads in 4 bedroom house? We have most off them turned off in the rooms/corridors we don't really need/use. There is two valves in the back of the stove - one with red cap that releases water when opened and the other has a copper spring thing that doesn't seem to do anything when turned from 0-4 position. Can post pics if needed. (would like to know what these are for)
I would like to get this sorted as it seems to me there must be something wrong along the line.
Thanks very much for any info/input on this.