Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Tuning Help

  • 08-01-2011 10:56AM
    #1
    Registered Users, Registered Users 2 Posts: 567 ✭✭✭


    Hey,
    Got a lovely Yahama FG730S for Christmas. Played it over the last week or two, then decided to get the old Fender AG-6 Tuner out.
    While it still sounded correctly tuned, I had to turn the keys close to one full revolution for the tuner to recognise the notes. Same for all strings.
    Now it still sounds correctly tuned, but the strings are tight, especially the first three.
    I tried loosening the 6th string right down, and re-tuning to see if the tuner would pick up the right note while keeping the string looser, but no.
    Any advice for a beginner?


Comments

  • Registered Users, Registered Users 2 Posts: 4,004 ✭✭✭Johnny Storm


    Assuming that you are using the tuner correctly then that's how tight those strings are going to be when tuned to concert pitch.
    You could try different strings (ie lower gauge strings) or you could tune your guitar down a semi-tone or two (which is probably what you had gotten used to before you got the tuner out).
    A good set-up of the guitar might improve playability.


  • Registered Users, Registered Users 2 Posts: 567 ✭✭✭garlad


    Cheers for reply.
    How do you tune your guitar down a semi-tone or two?


  • Registered Users, Registered Users 2 Posts: 4,004 ✭✭✭Johnny Storm


    Well, instead of tuning the string to E you would tune it to E flat or D.
    Could be that your tuner wont do that? IE some tuners will only work with EADGBE - which is what you meant by "re-tuning to see if the tuner would pick up the right note" I suppose. Some tuners will work with all notes. I think they're called chromatic tuners.
    If that's the case you'll have to do it by ear or get a new tuner.


  • Registered Users, Registered Users 2 Posts: 23,146 ✭✭✭✭Alanstrainor


    If you have the guitar tuned to EADGBE, and if you want to tune it down half a step. Play the 4th fret of the low E string, and tune down the A string until the two sound the same. Then you have the "A" string tuned to A flat. You should just be able to tune the rest of the strings normally after that, going back to the low E string at the end and tuning it down.


  • Registered Users, Registered Users 2 Posts: 567 ✭✭✭garlad


    You are right, my tuner wont do that.
    Thanks for the advice, will try what Alanstrainor said


  • Advertisement
Advertisement