Abbey Topper. Fully Offset

Mach Two · 14-07-2025 09:25PM #1

Anybody here got a fully offset Abbey topper maybe 15 yds old. I want to check out something

Jb1989 · 14-07-2025 09:36PM

What you need to check. I use one. Don't know age

Mach Two · 14-07-2025 10:18PM

The part of the shaft that is connected to the gearbox. There is a rubber booth/cover over it. I am looking to get a photo of the set-up under the cover. If the black cover is pulled back. I want a photo of the pto shaft cover and the universal joint. I removed the shaft cover to do a repair job on the joint and I think I left a part out. It does not look right.

Take a photo of the gear box first to see if it is the same as mine.

Jb1989 · 15-07-2025 12:07AM

Ill be passing mine tomorrow and will look

Mach Two · 16-07-2025 11:42AM

Picture here. Which I should have put up first.

Am I missing a part around the top of the pto cover. Around the white thing that goes around the end of the cover. The white part is very loose.The black rubber booth is in the background. It is upside down in the photo.

gazahayes · 16-07-2025 03:42PM

There's no cone on them as far as I can remember, should be no problem with out

Mach Two · 16-07-2025 09:18PM

https://www.boards.ie/discussion/comment/123641751#Comment_123641751

Is there a piece missing?

gazahayes · 16-07-2025 11:40PM

Don't think there is anything missing the white collar is to keep the pipe in place the bellows should hold the pipe after that.

blue5000 · 17-07-2025 08:44PM

https://www.boards.ie/discussion/comment/123640782#Comment_123640782

There's a big jubilee clip on ours at the base of the rubber boot. But we bought it second hand so the previous owner might have put the jubilee clip on. Ours is taken apart as had to put a new hardi spicer in it last week.