Lidl Parkside 20V 1000M2 robot mower review

Whats the total square meters of all your lawns combined?

If thats the case ,then the Yuka Mini 600 would be ideal.

it will cover 600 square meters and has no wire and will travel between zones.

Its €850 direct from the manufacturer.

There are probably plenty more options but I was researching for a relative with a similar set up as yours,3 separate lawns and it ticked all the boxes for them

hi folks,

I bought 2 of these too mowers when they came in a few weeks ago. 1 is out our back garden performing admirably, and the 2nd is to bring over to Lithuania this summer (driving over). I only got around to unboxing the 2nd one today in order to pack it and the accessories more efficiently when the time comes, and discovered the front corner has a crack on the outside shell!!

It looks like it would still do a job as is, but I can’t imagine that corner lashing too long when it’s numbing into trees/walls/fences etc….

Does anyone know the best route for contacting them regarding a replacement, which I assume they’d cover?

Yeah the Yuka Mini is overkill for the size of lawn to cut.

That could be ideal.

Anyone had their robot lawnmower seemingly reset itself. I've had it happen twice now. Once when it was being setup which I just put down to not finished the configuration. But it happened again yesterday. I have the lawnmower setup with wifi. When I looked at the app it was showing no schedule set and pin showing as default. When I checked the lawnmower it was parked in the base station but was powered off. I powered it on and it asked me for the language and to set a pin etc. The strange thing though was it was connected to wifi - I didn't have to set that up again so I could actually then configure everything else via the app. Hopefully won't keep happening.

Yes

I have a new one unopened with the receipt. It's past the 30 days but I presume they'll take it back?

First of all thanks to the folks that replied to my original post. I decided to give the mower a chance and turned it on today for the first time. Selected a language, set the date/time, and assigned a pin. Immediately afterwards it gave me an error "Loop signal lost". Pressing any button just takes me back to the pin entry screen. There's no chance to get to the main menu.

I have not laid down the wire yet. I was hoping I could do the first steps without having to do that. Like run a "spot" mow first to make sure this thing actually works.

Is there a workaround? Tried to submit the same question to the contact form at the grizzlytools.de site but got an error there as well. This all doesn't bode well.

I haven't seen this error and I don't know what it means but just wondering if it's possible there's underground mains cables or any other source of disturbance that might cause it? Someone told me recently that their mower stopped in the same place all the time and they eventually figured out the main power running underground to the house was under that part of the garden.

Bit of an ask i know but would anyone have a spare base station or charger? My charger **** itself so got onto customer service. They said they are waiting on stock. We are heading away for 2 months at start of July so starting to get worried it won't arrive before we go.

Thanks

where are you? If it’s unopened I think I know someone who’d buy it off you.

if you scroll back through the thread someone has tracked it down.