Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

AUTOMOWER Blue Flashing Light

  • 08-07-2024 12:00pm
    #1
    Moreilly
    Registered Users, Registered Users 2 Posts: 657 ✭✭✭


    Have a blue flashing light on the base station indicating a cable break. I went around the garden with a detector and could find no break.

    I disconnected all the cables and then connected a short piece of wire (about two foot )from the left terminal to the right terminal - Still a blue flashing light

    Has anybody got any ideas? ,grass is starting to get a bit long !!😥



Comments

  • #2
    E30M3
    Registered Users, Registered Users 2 Posts: 325 ✭✭E30M3


    How long was it running ok and what make/model



  • #3
    Moreilly
    Registered Users, Registered Users 2 Posts: 657 ✭✭✭Moreilly


    Husqvarna 430x, have it around 4/5 years



  • #4
    dzer2
    Registered Users, Registered Users 2 Posts: 2,965 ✭✭✭dzer2


    Where are you based pm if you Want



  • #5
    macraignil
    Registered Users, Registered Users 2 Posts: 3,594 ✭✭✭macraignil


    https://www.boards.ie/discussion/2058358786/automower-blue-flashing-light

    Probably circuit board in the charging station has developed a fault.



  • #6
    Moreilly
    Registered Users, Registered Users 2 Posts: 657 ✭✭✭Moreilly


    Rang the local place yesterday and said i was going to drop it in this morning for them to have a look at, had it all disconnected and ready to go…

    thought i better check again as knowing my luck i'd arrive and it would be working … stuck the short bit of cable on between the left and right terminals and guess what… solid green light !

    Brought the base station back over to to its proper area, connected all the wires - solid green light ! happy days!!

    automower running for about 1 hour…. suddenly no loop signal again, flashing blue light even when short bit of cable used to directly connect the left and right :( , does seem to narrow it down to circuit board on base station / transformer maybe… my head is wrecked, going to bring it in tomorrow



  • Advertisement
Advertisement