If you have a new account but are having problems posting or verifying your account, please email us on for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

CT Clamp on Sofar HYD 6000-EP

  • 21-02-2023 12:59pm
    Registered Users Posts: 429 ✭✭

    Hi All,

    Where exactly do I wire the CT Clamp into the inverter on the Sofar HYD 6000-EP. I have the clamp attached to my LIVE meter box and extended it with CAT 5 all the way to the inverter location. The 6000-EP looks to have different interface options than other models.




  • Registered Users Posts: 10,803 ✭✭✭✭the_amazing_raisin

    I think it goes to pins 13&14 if you're using only the CT clamp, but if you're using a separate meter then the CT goes to the meter and the meter wires to pins 15&16 on the Sofar

    My installer is coming back tomorrow to commission the system, so I'll check with him then

    "The internet never fails to misremember" - Sebastian Ruiz, aka Frost

  • Registered Users Posts: 429 ✭✭jasgrif11

    Excellent thanks. I’ll wait to hear

  • Registered Users Posts: 3,168 ✭✭✭irishchris

    @Jamie2k9@jasgrif11 it is wired straight into the com module into pin 13 for CT - and 14 for CT +

  • Registered Users Posts: 10,803 ✭✭✭✭the_amazing_raisin

    So I was chatting to the installer today and he said it should be wired to 13&14 if you're using a battery, otherwise it should be wired to 15&16 🤷‍♂️

    "The internet never fails to misremember" - Sebastian Ruiz, aka Frost

  • Registered Users Posts: 429 ✭✭jasgrif11

    CT all wired up and working. Thanks

  • Advertisement