Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on [email protected] for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact [email protected]

Problem with Zappi V2.1 working with Eddi v1.0 - Eddi is draining my battery after the sun goes down

  • 08-02-2023 6:34pm
    #1
    Registered Users Posts: 1,786 ✭✭✭


    So I originally had an Eddi with panels and a battery and it was working fine for a year. I had gone into Advanced/Supply Grid menu and set the threshold settingsa to 150w and the response delay to 30 seconds.

    That was all working fine. The Ediit never drained my battery.

    Two weeks ago I got a Zappi V2 installed with a hub. Installer set the zappi up as the master and the Eddi as the slave. But my eddi is using 800w from my batter after the sun goes down.

    So i went into the Supply settings menu and i no longer have options for the threshold settings on the eddi.

    Does anyone by any chance know how i set this up so that the eddi doesnt use the battery anymore and only uses surplus solar? I dont mind if the zappi uses the battery in eco+ mode.

    The installer has stopped answering the phone.

    Any myenergi experts out there?



Comments

Advertisement