Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

2011 Zafari 1.7 electrical problem

  • 19-12-2022 12:41pm
    #1
    Donal 1957
    Registered Users, Registered Users 2 Posts: 30 ✭


    Hi Everyone, My 2011 Zafari 1.7 keeps blowing a fuse, (Link to Fusebox Image 1drv.ms/u/s!AkhgRG46SGqLj-xvr3qf8Fb0LUOZzA?e=K2hWwM ) The engine cuts out when the fuse blows and the Starter motor wont turn over to restart until a new fuse is put in. It has been getting worse over time, and now it will start for a minute at most with a new fuse. I dont live near a car electrician or I'm not near a main dealer so any help would be apricated. I cant think how the engine electric and the starter motor are connected or what is shorting out the fuse. all other electric seem to be ok. I'm been told its fuse F30 which is the engine management fuse and this fuse feeds the Air mass Meter, the ECU and the glow timer control if that helps

    IMG_20221218_104806 copy.jpg




Comments

  • #2
    Esel
    Registered Users, Registered Users 2 Posts: 23,092 ✭✭✭✭Esel
    Not Your Ornery Onager


    What is the blob at the right hand side of the fuse?

    Not your ornery onager



  • #3
    Hellrazer
    Moderators, Arts Moderators, Recreation & Hobbies Moderators Posts: 10,885 Mod ✭✭✭✭Hellrazer


    More than likely the fuse box needs replacing. They are known for water ingress.

    Take those 2 torx screws out and the fuse box will separate. Ther might be a 3rd one under the black cover in the top left of your picture. The circuit board underneath will look corroded.

    Ive seen it on a fair few of these.



  • #4
    paultronix
    Registered Users, Registered Users 2 Posts: 150 ✭✭paultronix


    Denso Ecu very prone to water damage particularly at this time of year, also open up the wiring loom from fusebox to ecu and check for damaged/rubbing cables.



Advertisement