For Sale. Vintage Parker Hale gloss scope mounts.

pg339

I have for sale two sets of Parker Hale gloss scope mounts/rings to fit the older BRNO model 1, model 2, 22 hornet and BSA supersport with 17mm dovetail.

Set 1. RBH4 and RBHS4 (with stop pin) 26mm high mounts. These also work fine with a slight shim for 1" scopes.

Set 2. RBL3 and RBLS3 (with stop pin) 1" low mounts.

These are in excellent used condition with a good gloss. Price is 60 euro per set posted. Paypal f&f preferred. (Co Armagh).

IMG_20210811_140949_6.jpg

IMG_20210811_140422_0.jpg

IMG_20210811_140659_2.jpg

IMG_20210811_140450_2.jpg

IMG_20210811_140721_0.jpg

IMG_20210811_140512_2.jpg

IMG_20210811_140828_6.jpg

 

pg339

Sunday bump up

pg339

Anybody for these before they go to the bay?

Zxthinger

what's the craic with the shimming to take a 1 inch tube.. are the rings slightly over sized or are you talk about getting the scope objective up a. It higher to clear the barrel?

Zxthinger

Also are both mount-set 17mm?

Also what's yer best price. I might take a punt on them but they re not exactly for the same model gun.

My guns toprail measures 16.5 and not 17 so the might work!

Will ye split them, I take one for 30 or two for 50.. what ye thinking

pg339

The 26mm mounts take a scope with 26mm tube. A 1" tube is 25.4mm so they are 0.6mm difference. I have had them fitted to a 1" scope with no issues but on some 1" scopes a very fine shim inside the ring may be needed for a snug fit. They will fit the 16.5mm dovetail. What make and model of rifle are they for?

Your offer price is way too low, check out the price of Parker Hale gloss mounts, that's if you can find any for sale. Thanks for the interest.

Zxthinger

going on a CZ 611

pm me yer best price on 25.4 bore. Don't forget that that customs and revenues te going to nail me.

Are yer ever down south?!

pg339

I'm in Armagh and can post in the south so no issues there. These mounts will fit the Brno 611, I know that because I have one. Are you putting a gloss scope on the 611? If you are then these mounts are perfect. If you're fitting a modern Matt finish scope then a set of Matt rings such as sportsmatch is the way to go. I now have a Hawke 4-16x44 side focus scope on my 611 with sportsmatch medium mounts and very happy with that set up. Let me know what you think.

Zxthinger

it's hard to follow this new format/platform so I'm just letting you know that you have a PM from me. I've requested the 25.4mm dia mounts these being the smaller of the two..

Thanks

Zxthinger

Dont suppose you can send me details to allow purchase of the small 25.4mm rings. I'm sure they'll work fine.. Thanks

pg339

Low mounts sold.