Garden Shed Options

bamayang

There's a good few threads on this topic, but a lot are 3+ years old at this stage.
Just wondering does anyone have feedback on a good shed provider that has a product that will last.
Steeltech are nice, but they are expensive in comparison to others. Or is it that others are much poorer standard?
Looking at a 13 x 10' for garden storage, lawnmower, deck furniture that kind of thing. Dont want to get something 'good value' that is crumbling in 5 years time.

Any advise or experience of good suppliers appreciated.
Thanks

bamayang

Dohvolle wrote: »

I got a Steeltech in June. Realistically, 4 grand is your budget for that size, including foundation slab/floor.
However, there hasn't been a drop of condensation on anything stored inside (lawmowers, motorcycle, tools, bicycle) and we have had a pretty nasty winter.
I have seen other steel sheds and nothing comes close to the quality. 20 year warranty. Timber sheds vary in quality depending on supplier, but for a similar size you can expect to pay about half what the Steel one costs, but unless you look after it, You'll need a new one in 10 years. Also, if you don't install it on a hard surface, you'll be dealing with stuck doors for a lifetime.

Which type or model did you go for?
I was looking at the 13x10 and they are about €2,600. I’d say I’d do as the video on their site suggests with pouring a foundation around the perimeter. And then after installed pour a 3” floor inside.
I’d rather pay the extra bit and avoid future hardship, so I’m happy to hear you’ve had good results.

Garlinge

I have wooden shed just on 30 yrs now, needs maintenance yearly as in coat of 'fencelife' (easy to apply) on exterior that can reach. I have had roof refelted once. Yes door a bit dodgy but works and replaced hinges once. So I suppose it depends how long you will need it for and how much care you can give it? Also mine is located in sheltered corner of garden so high walls on two side and that prob helps. Probably at end of life and my need for it now!

Wildly Boaring

Clane sheds
Come with a floor in them, no need concrete floor

Comes with a proper door and window.

Pleasure to deal with.

Hocus Focus

Wildly Boaring wrote: »

Clane sheds
Come with a floor in them, no need concrete floor

Comes with a proper door and window.

Pleasure to deal with.

+1 for Clane Garden Sheds. (No connection, satisfied customer).

Hocus Focus

Dohvolle wrote: »

3m by 5m, or 13 by 10. €2840 at the time. I got a full slab laid. Shed won't deliver until at least 5 weeks had passed since concrete poured(steeltech guy comes out to make sure its ok, access is good etc). Then covid happened and everything stopped, but as soon as they reopened shed went in and slab man was back the day after to finish off the floor. I sealed the floor as soon as the concrete had cured.
As for the steel sheds with their own floor, I'm parking 300kG of motorbike in mine. It would punch a nice hole in a steel floor over time.

The one I got from Clane Garden Sheds has a WBP ply floor on steel joists. It did not need a concrete slab, just concrete block footings installed by the shed erectors. All still perfect after 3 or 4 years.

Wildly Boaring

Hocus Focus wrote: »

The one I got from Clane Garden Sheds has a WBP ply floor on steel joists. It did not need a concrete slab, just concrete block footings installed by the shed erectors. All still perfect after 3 or 4 years.

No concrete here.
Sat on compacted stone. (804)

Wildly Boaring

Dohvolle wrote: »

As I say, not an option for parking motorcycle, unless you want to be messing about with extra planks under the stand every time.

Read the OP
That's what we're replying to.
Lawnmower and a few deck chairs.

Your motorbike 8s nothing to do with it

Turbulent Bill

I'd be a bit worried about damp ingress under the walls of a steel shed which doesn't have a concrete base. Maybe the ones that come with bases already have this solved, but you really need something with a damp proof membrane.

I've a 5 year old Steeltech shed on a concrete base, has been excellent.

alanhiggyno1

What's the cost of a shed from clane for those that bought. They have no prices. I'd be looking at 10 x 10

Wildly Boaring

Mines 10 by 20.
Was just over 3000 I think

Give them a ring.

jgalvin

How good does the access have to be? I wanted to put a 10x10 steeltech shed in a woodland area on the other side of the garden and a lorry wouldn't get near it, but you can wheel a hand truck or a wheelbarrow over there no bother. Would that be OK?

How much should it cost to get someone to put a concrete base down?

jgalvin

Dohvolle wrote: »

Best part of 3 grand. My lads brought their own concrete,I'm lucky that there are numerous concrete suppliers nearby, but its as easy to mix yourself on site, expect to add cost for the hire of a mixer for the day. They'll have to dig the site out level first,(add cost of hire mini-digger) put down a course of hardcore (weed block membrane first if you like, but not essential), compact hardcore flat with a whacker(add cost of hire), set shoring boards level, mix and pour concrete to approved depth, level it off. Day and a half work max. If all materials available and ready to go.
Using readymix and having easy access means they can do the job in a straight day usually, in your case it could take 2 days or more.
Now by my maths, that's about 5 tonne of hardcore, cement and sand you want to be barrowed to site.(about €50 per tonne for hardcore and sand, cement can vary, but woodies were doing 4x25kg for €20.) Most wheelbarrows will carry 50kg at a time. In reality they'll use a mini loadall (add cost of hire) to bring materials to site. Nobody will barrow 5 tonne of materials to a site unless they have plenty of spare time.

When all that is done you need to make sure the shed installer has safe access to the site too.
My advice, visit the shed showroom, they have guys they recommend for concrete slab, give one a call, most are happy to come and look at a site and give you the plain truth. Expect to be punished financially for having poor access.

Thanks for the advice, I had no idea it would be such a big job to get the concrete down and hadn't considered that there would be so much material. I'll call them to send someone out to look at the site.

bamayang

jgalvin wrote: »

Thanks for the advice, I had no idea it would be such a big job to get the concrete down and hadn't considered that there would be so much material. I'll call them to send someone out to look at the site.

If your not in a rush, have time on weekends and are fit and healthy, you'd manage it on your own handy enough.You'd prob be as well buy a small mixer though and sell it on afterwards, prob wouldnt lose more than €100 on it.

jgalvin

I think I would enjoy the work, and have the time, just paranoid that I would make a hames of it and the guys who assemble the shed would reject me on the day!
Maybe I should just plonk down a barna with a wooden floor and get 12 years out of it... nothing heavier than a lawnmower inside.

Darc19

Not sure where you are based, but a decent wooden shed with regular maintenance will last many years.

I got a 16x10 back in 2006 from moody Brothers outside Kildare Town http://cms.moodybrothersgardensheds.com/garden-sheds/ (site is not great)

It gets a lick of fencelife every couple of years. Got roof refelted 2 years ago.

It's still as good as new.

Carrys the usual garden shed stuff and acts as a little workshop.

peasant

I can still recommend the happy medium...wooden frame, steel clad shed ...very happy with mine so far. Bone dry, no maintenance, low cost

https://www.boards.ie/vbulletin/showthread.php?p=107161271

That's a 100 kg lawnmower and a motorbike in there btw ...:D

I did however re-inforce and creosote the wood floor before I put it down (got it delivered in advance of the shed)

bamayang

jgalvin wrote: »

I think I would enjoy the work, and have the time, just paranoid that I would make a hames of it and the guys who assemble the shed would reject me on the day!
Maybe I should just plonk down a barna with a wooden floor and get 12 years out of it... nothing heavier than a lawnmower inside.

Ah ya couldnt really make a balls of it. Just look at a few youtube videos and have a go. There's a good explainer video on steeltech website showing how to do it. Ya'd get great satisfaction from doing it yourself, and save yourself a ball of cash.