Denon Ceol?

peking97

I cannot find the Ceol N10 in white on your website. Has it been discontinued or is it soon to be superseded by the Ceol N11 perhaps?

Richersounds.ie: DavidS

peking97 wrote: »

I cannot find the Ceol N10 in white on your website. Has it been discontinued or is it soon to be superseded by the Ceol N11 perhaps?

Hey Peking97.

At the minute is seem to be only the Black in stock unfortunately.

There is nothing so far regarding a N11.

I will check with our purchasing team first thing tomorrow to see if the White N10 is due back into stock anytime soon.

I'll be in touch once I find out some info.

Kenny.

peking97

Looks like my suspicions were correct!

https://auth.denon.com/shop/networksystem/ceoln11dab

Richersounds.ie: DavidS

peking97 wrote: »

Looks like my suspicions were correct!

https://auth.denon.com/shop/networksystem/ceoln11dab

Hi peking97,

We are starting to see info for the new Denon lines and a lot of them will be hitting us in September. I have no ETA for the N11 yet but I dare say we'll start to see them in Autumn!

Let me know what you think!

Kind regards

David

peking97

Hi David,

Can you give me your best Boardsie price for the N11 in Euro inc delivery to Co Clare please?

Richersounds.ie: DavidS

peking97 wrote: »

Hi David,

Can you give me your best Boardsie price for the N11 in Euro inc delivery to Co Clare please?

Hi Peking97.

Thanks for coming back to us.

I've dropped you a PM.

Kenny.

sidegolo

Out of curiosity, I compared the specs for both N10 and N11 and are identical. Bar the DAB/DAB+ radio...

peking97

sidegolo wrote: »

Out of curiosity, I compared the specs for both N10 and N11 and are identical. Bar the DAB/DAB+ radio...

I emailed Denon and in addition to the DAB/DAB+ they advise that the Bluetooth version has been upgraded.

sidegolo

peking97 wrote: »

sidegolo wrote: »

Out of curiosity, I compared the specs for both N10 and N11 and are identical. Bar the DAB/DAB+ radio...

I emailed Denon and in addition to the DAB/DAB+ they advise that the Bluetooth version has been upgraded.

Thanks will have a look. Do you do cables burn in when purchased new?

Richersounds.ie: John

Sidegolo,

thanks for the post and apologies for the delay getting back to you.

I do know and understand why some people and reviewers feel that they can hear a difference when cables are 'burnt-in' but personally I have not heard the difference and at the moment this is not a service we offer.

..however there are LARGE difference between speaker cables and and interconnects and we would recommend that Customers do set aside a little of their budget for decent cables - but do also remember that the most expensive cables will not necessarily be the best - but you can use cables to improve and obtain the sound balance that you are looking to achieve.

Thanks again, apologies that we don't offer this service and keep us posted if we can assist in any way,

ATVB,

John Mc & Crew

sidegolo

Richersounds.ie: John wrote: »

Sidegolo,

thanks for the post and apologies for the delay getting back to you.

I do know and understand why some people and reviewers feel that they can hear a difference when cables are 'burnt-in' but personally I have not heard the difference and at the moment this is not a service we offer.

..however there are LARGE difference between speaker cables and and interconnects and we would recommend that Customers do set aside a little of their budget for decent cables - but do also remember that the most expensive cables will not necessarily be the best - but you can use cables to improve and obtain the sound balance that you are looking to achieve.

Thanks again, apologies that we don't offer this service and keep us posted if we can assist in any way,

ATVB,

John Mc & Crew

Thanks for the reply. I came across an article about the new audioquest rocket 11 speaker cables. I have been using the audioquest G2 for years. They were part of a bundle along with the zensor 1 and a previous denon receiver i owned. Would you know if there is much of a difference between the audioquest rocket and G2 cables?

Richersounds.ie: DavidS

sidegolo wrote: »

Richersounds.ie: John wrote: »

Sidegolo,

thanks for the post and apologies for the delay getting back to you.

I do know and understand why some people and reviewers feel that they can hear a difference when cables are 'burnt-in' but personally I have not heard the difference and at the moment this is not a service we offer.

..however there are LARGE difference between speaker cables and and interconnects and we would recommend that Customers do set aside a little of their budget for decent cables - but do also remember that the most expensive cables will not necessarily be the best - but you can use cables to improve and obtain the sound balance that you are looking to achieve.

Thanks again, apologies that we don't offer this service and keep us posted if we can assist in any way,

ATVB,

John Mc & Crew

Thanks for the reply. I came across an article about the new audioquest rocket 11 speaker cables. I have been using the audioquest G2 for years. They were part of a bundle along with the zensor 1 and a previous denon receiver i owned. Would you know if there is much of a difference between the audioquest rocket and G2 cables?

Hi sidegolo,

I haven't actually heard the G2 cables running so can't comment accurately but the Rocket 22s are great cables, they use a lower oxygen content copper and also have great sheilding!

We use it in the demo room and it is a great cable!

Let me know what you think!

Kind regards

David

sidegolo

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Sidegolo,

thanks for the post and apologies for the delay getting back to you.

I do know and understand why some people and reviewers feel that they can hear a difference when cables are 'burnt-in' but personally I have not heard the difference and at the moment this is not a service we offer.

..however there are LARGE difference between speaker cables and and interconnects and we would recommend that Customers do set aside a little of their budget for decent cables - but do also remember that the most expensive cables will not necessarily be the best - but you can use cables to improve and obtain the sound balance that you are looking to achieve.

Thanks again, apologies that we don't offer this service and keep us posted if we can assist in any way,

ATVB,

John Mc & Crew

Thanks for the reply. I came across an article about the new audioquest rocket 11 speaker cables. I have been using the audioquest G2 for years. They were part of a bundle along with the zensor 1 and a previous denon receiver i owned. Would you know if there is much of a difference between the audioquest rocket and G2 cables?

Hi sidegolo,

I haven't actually heard the G2 cables running so can't comment accurately but the Rocket 22s are great cables, they use a lower oxygen content copper and also have great sheilding!

We use it in the demo room and it is a great cable!

Let me know what you think!

Kind regards

David

Thanks David, the Rocket 22s would go well with my current system and speakers, won't they?

Richersounds.ie: John

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

sidegolo

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Richersounds.ie: DavidS

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

sidegolo

By the way, would you normally recommend speakers stands? My speakers currently sit on a table with the stereo system. I can't hear any vibration or muddy sound. I'm just wondering if stands do make a noticeable difference for speaker sound.

Richersounds.ie: DavidS

sidegolo wrote: »

By the way, would you normally recommend speakers stands? My speakers currently sit on a table with the stereo system. I can't hear any vibration or muddy sound. I'm just wondering if stands do make a noticeable difference for speaker sound.

Hi sidegolo,

A speaker stand would give a better sound as it would take the speakers away from the wall and allow more breathing space however as long as the speakers are roughly at ear height and have enough space to allow for porting then you should be fine on a shelf!

Let me know what you think!

Kind regards

David

sidegolo

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Hi Sidegolo.

You can order direct via our website and I can refund the difference on the cable ( I quoted you a bit of a deal on it).

Or you can PM me your contact number and we can give you a call to finalise the order at the agreed pricing above.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Hi Sidegolo.

You can order direct via our website and I can refund the difference on the cable ( I quoted you a bit of a deal on it).

Or you can PM me your contact number and we can give you a call to finalise the order at the agreed pricing above.

Hello Kenny,

I just PM my phone number to finalize the order. :-)

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Hi Sidegolo.

You can order direct via our website and I can refund the difference on the cable ( I quoted you a bit of a deal on it).

Or you can PM me your contact number and we can give you a call to finalise the order at the agreed pricing above.

Hello Kenny,

I just PM my phone number to finalize the order. :-)

Cheers Sidegolo.

I will call you ASAP.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Hi Sidegolo.

You can order direct via our website and I can refund the difference on the cable ( I quoted you a bit of a deal on it).

Or you can PM me your contact number and we can give you a call to finalise the order at the agreed pricing above.

Hello Kenny,

I just PM my phone number to finalize the order. :-)

Cheers Sidegolo.

I will call you ASAP.

Hi Jenny, I just replied to your message. I hope it's gone through.

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

sidegolo wrote: »

Richersounds.ie: John wrote: »

Hi Sidegolo,

If you are still using Dali Zensor - yep Rocket 22 would sound great!

ATVB,

John Mc & Crew

Hi John, thanks for your reply. How much would it be for 1.5m cable with banana plugs? and is there much difference in price without them?

Hi Sidegolo.

The cable is priced per meter so it would need to be 2 meters.
The Rocket 22 is priced at £20 per meter but I could offer it for £16 per meter.
https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx

The Audioquest banana plugs are priced at £29.99 for a set of 8 (4 Pairs)
https://www.richersounds.ie/p-13686-audioquest-suregrip-sg100-gold-banana-plugs-set-8-speaker-cable-banana-plugs-4-pairs.aspx

Let me know your thoughts.

Kenny.

Hello Kenny,

Thanks for your reply. As with the cables, I don't think I need more than 1.5 meter per cable. But if you sell them minimum 2 meter length then that's fine, in case i get the stands in the future for when I relocate. Ideally, id like the speakers end with banana plugs and stripped bared wire on the amp end.

Hi Sidegolo.

Thanks for coming back to me.

Speaker cable is priced per meter.
If you required 1.5 meter per side then that would be 3 meters in total and we can cut it into 2x 1.5 meters for you.

We can then put the plugs on one end of the cable and leave the other bare for you.
If you only require 2 pairs then the Cambridge 4mm plugs would do the job.
Priced at £5.99 per pair
https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx

Let me know what you think.

Hi,

Thanks for your reply.
Would you strip the wires for me, so I can just connect them and that's it? I probably asked you before about the burning in time for speaker cables, but from what i read on many forums and from users personal experience, it normally takes a few hundreds of hours before they reach optimal performance.

Hi Sidegolo.

Yes we can indeed strip the wires back for you no problem

It can take a good few hours for the cables to reach total performance but it will still sound good to start with.

Thanks for your message! Just to confirm, i can order the cable from https://www.richersounds.ie/p-203556-audioquest-rocket-22-speaker-cable-per-metre.aspx and the plugs from the page https://www.richersounds.ie/p-202337-cambridge-audio-4mm-banana-plugs-v2-speaker-cable-banana-plugs-per-pair.aspx, correct? Alternatively can i place the order here for the cables at for £16 per meter and the plugs at 5.99£ per pair?

Hi Sidegolo.

You can order direct via our website and I can refund the difference on the cable ( I quoted you a bit of a deal on it).

Or you can PM me your contact number and we can give you a call to finalise the order at the agreed pricing above.

Hello Kenny,

I just PM my phone number to finalize the order. :-)

Cheers Sidegolo.

I will call you ASAP.

Hi Jenny, I just replied to your message. I hope it's gone through.

Thanks Sidegolo.

I will get back to you ASAP.

sidegolo

Richersounds.ie: Kenny wrote: »

Thanks Sidegolo.

I will get back to you ASAP.

Hey Kenny, you can ring me from about 4 o'clock this afternoon 😊

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

Thanks Sidegolo.

I will get back to you ASAP.

Hey Kenny, you can ring me from about 4 o'clock this afternoon 😊

Hi Sidegolo.

I have you in my diary for the call

sidegolo

Richersounds.ie: Kenny wrote: »

Hi Sidegolo.

I have you in my diary for the call

Hello Kenny!

I have received the cables yesterday afternoon. Haven't tried to install them yet but both ends have the plugs installed. No bare wires. My Ceol n10 would not accept plugs on the amplifier end for the speaker connectors.

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

Hi Sidegolo.

I have you in my diary for the call

Hello Kenny!

I have received the cables yesterday afternoon. Haven't tried to install them yet but both ends have the plugs installed. No bare wires. My Ceol n10 would not accept plugs on the amplifier end for the speaker connectors.

Hi Sidegolo.

Seems someone add plugs to the 2nd end by mistake.

You can remove these really easily by unscrewing the plastic end and then removing the cable from the plug.
I do apologise for any hassle that this may cause.

You can keep the 2 free sets of plugs in case you ever need them for something else.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

Hi Sidegolo.

I have you in my diary for the call

Hello Kenny!

I have received the cables yesterday afternoon. Haven't tried to install them yet but both ends have the plugs installed. No bare wires. My Ceol n10 would not accept plugs on the amplifier end for the speaker connectors.

Hi Sidegolo.

Seems someone add plugs to the 2nd end by mistake.

You can remove these really easily by unscrewing the plastic end and then removing the cable from the plug.
I do apologise for any hassle that this may cause.

You can keep the 2 free sets of plugs in case you ever need them for something else.

Hello Kenny,

Thanks for that!

I finally managed to install them early this evening. I struggled a bit to connect the cables into the amplifier terminal as the bare copper wires are thicker than i expected. I couldn't push them any further into the Denon's cable slot (badly designed) but just enough to connect them leaving the rest of the bare wire exposed.

Out of the box, these sound immediately pretty good, almost as punchy as the previous cables i had been using until today. I can't wait for them to run in and settle completely with the rest of the electronics.

Richersounds.ie: Kenny

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

Hi Sidegolo.

I have you in my diary for the call

Hello Kenny!

I have received the cables yesterday afternoon. Haven't tried to install them yet but both ends have the plugs installed. No bare wires. My Ceol n10 would not accept plugs on the amplifier end for the speaker connectors.

Hi Sidegolo.

Seems someone add plugs to the 2nd end by mistake.

You can remove these really easily by unscrewing the plastic end and then removing the cable from the plug.
I do apologise for any hassle that this may cause.

You can keep the 2 free sets of plugs in case you ever need them for something else.

Hello Kenny,

Thanks for that!

I finally managed to install them early this evening. I struggled a bit to connect the cables into the amplifier terminal as the bare copper wires are thicker than i expected. I couldn't push them any further into the Denon's cable slot (badly designed) but just enough to connect them leaving the rest of the bare wire exposed.

Out of the box, these sound immediately pretty good, almost as punchy as the previous cables i had been using until today. I can't wait for them to run in and settle completely with the rest of the electronics.

Hey Sidegolo.

Glad you got things up and running.

You could trim the copper ends a little so that not as much is exposed or if you had a bit of electrical tape you could wrap it around the exposed wire up to the terminal.

If you have any issues please let me know.

sidegolo

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

sidegolo wrote: »

Richersounds.ie: Kenny wrote: »

Hi Sidegolo.

I have you in my diary for the call

Hello Kenny!

I have received the cables yesterday afternoon. Haven't tried to install them yet but both ends have the plugs installed. No bare wires. My Ceol n10 would not accept plugs on the amplifier end for the speaker connectors.

Hi Sidegolo.

Seems someone add plugs to the 2nd end by mistake.

You can remove these really easily by unscrewing the plastic end and then removing the cable from the plug.
I do apologise for any hassle that this may cause.

You can keep the 2 free sets of plugs in case you ever need them for something else.

Hello Kenny,

Thanks for that!

I finally managed to install them early this evening. I struggled a bit to connect the cables into the amplifier terminal as the bare copper wires are thicker than i expected. I couldn't push them any further into the Denon's cable slot (badly designed) but just enough to connect them leaving the rest of the bare wire exposed.

Out of the box, these sound immediately pretty good, almost as punchy as the previous cables i had been using until today. I can't wait for them to run in and settle completely with the rest of the electronics.

Hey Sidegolo.

Glad you got things up and running.

You could trim the copper ends a little so that not as much is exposed or if you had a bit of electrical tape you could wrap it around the exposed wire up to the terminal.

If you have any issues please let me know.

Hi Kenny,

How can I do the copper end trimming? I remove the cables to try and do it but did not succeed. I then tried to put them back but this time I wasn't able to fit both copper wires into the terminal pin hole, leaving one cable on each + and - terminal out. I powered the system up again and it sounds different, not as good.

sidegolo

sidegolo wrote: »

Hi Kenny,

How can I do the copper end trimming? I remove the cables to try and do it but did not succeed. I then tried to put them back but this time I wasn't able to fit both copper wires into the terminal pin hole, leaving one cable on each + and - terminal out. I powered the system up again and it sounds different, not as good.

Unfortunately, one cable on the other end came off the plug when I was reinstalling the cables after trying to trim them. The copper wire wouldn't go fully back into the metal plug and stay very loose. Is there a chance I can send them on to you for repair or should I make a new order?

Richersounds.ie: DavidS

sidegolo wrote: »

sidegolo wrote: »

Hi Kenny,

How can I do the copper end trimming? I remove the cables to try and do it but did not succeed. I then tried to put them back but this time I wasn't able to fit both copper wires into the terminal pin hole, leaving one cable on each + and - terminal out. I powered the system up again and it sounds different, not as good.

Unfortunately, one cable on the other end came off the plug when I was reinstalling the cables after trying to trim them. The copper wire wouldn't go fully back into the metal plug and stay very loose. Is there a chance I can send them on to you for repair or should I make a new order?

Hi Sidegolo,

We have just checked in store and the binding posts are ones that need to be pushed in and the bare cable inserted through the hold that's created in the side. The holes themselves are quite thin so there are two ways we can do this. You can send us the cables back and we can look at a thinner cable for you or if you have the ends bared if you cut a a few of the copper strands away it will make the cable ends a bit thinner and you should be able to fit them in snugly.

Let me know how you'd like to proceed and we can get you sorted!

Kind regards

David

sidegolo

Richersounds.ie: DavidS wrote: »

Hi Sidegolo,

We have just checked in store and the binding posts are ones that need to be pushed in and the bare cable inserted through the hold that's created in the side. The holes themselves are quite thin so there are two ways we can do this. You can send us the cables back and we can look at a thinner cable for you or if you have the ends bared if you cut a a few of the copper strands away it will make the cable ends a bit thinner and you should be able to fit them in snugly.

Let me know how you'd like to proceed and we can get you sorted!

Kind regards

David

Hi David,

Thanks for getting back to me.

I can send the cable back no problem. In that case, could it be repaired at all? Ideally, I would like to stick with the rocket 22.

Thanks again for your help.

Richersounds.ie: DavidS

sidegolo wrote: »

Richersounds.ie: DavidS wrote: »

Hi Sidegolo,

We have just checked in store and the binding posts are ones that need to be pushed in and the bare cable inserted through the hold that's created in the side. The holes themselves are quite thin so there are two ways we can do this. You can send us the cables back and we can look at a thinner cable for you or if you have the ends bared if you cut a a few of the copper strands away it will make the cable ends a bit thinner and you should be able to fit them in snugly.

Let me know how you'd like to proceed and we can get you sorted!

Kind regards

David

Hi David,

Thanks for getting back to me.

I can send the cable back no problem. In that case, could it be repaired at all? Ideally, I would like to stick with the rocket 22.

Thanks again for your help.

Hi sidegolo,

I think we've been emailing as well!

We can stick with the emails thread sure as I can get to those faster!

Kind regards

David