Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Making a window frame

  • 31-12-2019 2:18pm
    #1
    the culture of deference
    Banned (with Prison Access) Posts: 2,196 ✭✭✭


    I bought a 2nd hand triple glazed window and have removed glass. I need to build a smaller frame for the glass so that it fits with frame into 190cm x 50cm. What wood and joins should I use for frame.


    Glass is 180cm x 40cm and weights 10kg


Comments

  • #2
    timfromtang
    Registered Users, Registered Users 2 Posts: 570 ✭✭✭timfromtang


    traditional woods for window frames would include larch heartwood, scots pine (red deal) and heartwood of oak amongst others.
    joints are usually mortice and tenon.
    tim

    www.youtube.com/c/timfromtang

    Fuinseog abú



  • #3
    recipio
    Registered Users, Registered Users 2 Posts: 2,804 ✭✭✭recipio


    Assuming you are going to paint it you will find Iroko the easiest to find.Not to be confused with Teak - some outlets sell it as ' Teak/ Iroko' :eek: Of course you will have to machine it unless you are getting it done by a joinery works.Scots pine was the traditional wood of the Georgians/Victorians.
    Ideally you should use a mortise and tenon joint but I have seen finger joints milled on a spindle moulder used . If you have no other way then a glued half lap joint is perfectly strong.


Advertisement