Strong bombproof toilet?

Pixied

Hi

I’m starting to look at a bathroom renovation. We’ve had lots of problems with toilets over the years. (One of the people who uses it, is on the large side and I think that’s part of the problem).

The problems have been:
The flush breaks, a lot.
The toilet seats break, they get loose and need replacing.
I’ve had a toilet unit move and need to be replaced.
Blockages.

I’m basically looking to have a good sturdy toilet and set up to support it.

Any advice appreciated?

upupup

Pixied wrote: »

Hi

I’m starting to look at a bathroom renovation. We’ve had lots of problems with toilets over the years. (One of the people who uses it, is on the large side and I think that’s part of the problem).

The problems have been:
The flush breaks, a lot.
The toilet seats break, they get loose and need replacing.
I’ve had a toilet unit move and need to be replaced.
Blockages.

I’m basically looking to have a good sturdy toilet and set up to support it.

Any advice appreciated?

Maybe something like thishttps://www.google.com/search?q=slatted+shed&rlz=1C1CHBF_enIE750IE750&tbm=isch&source=iu&ictx=1&fir=y3jo46U6nq8ZDM%253A%252C8VveMc5hKm3KZM%252C_&vet=1&usg=AI4_-kSX02QmxxezS0dsz8Z1SUe7t3F0Xg&sa=X&ved=2ahUKEwjmmfibsOPhAhXyURUIHanPBlEQ9QEwAnoECAYQCA#imgrc=_&vet=1

Pixied

upupup wrote: »

Maybe something like thishttps://www.google.com/search?q=slatted+shed&rlz=1C1CHBF_enIE750IE750&tbm=isch&source=iu&ictx=1&fir=y3jo46U6nq8ZDM%253A%252C8VveMc5hKm3KZM%252C_&vet=1&usg=AI4_-kSX02QmxxezS0dsz8Z1SUe7t3F0Xg&sa=X&ved=2ahUKEwjmmfibsOPhAhXyURUIHanPBlEQ9QEwAnoECAYQCA#imgrc=_&vet=1

Yeah, tempting.

But I’d rather keep my money, move out and get my own place first 😂 :-)

Victor

I imagine the manufacturers have literally seen everything. Talk to some manufacturers / agents and see what they have. There are even robust models available: https://www.google.com/search?q=prison+wc&rlz=1C1CHBF_enIE704IE704&source=lnms&tbm=isch&sa=X&ved=0ahUKEwi4wMCYtOPhAhVzsXEKHdVdD6kQ_AUIDigB&biw=1024&bih=657#imgrc=5dr8mfxx-J4crM:

Pixied wrote: »

The flush breaks, a lot.

Has the flush been replaced? If not, blame a dud unit / one that needs maintenance. If it has been replaced, tell the users it's a toilet flush, not a pull-start lawnmower.

Pixied wrote: »

The toilet seats break, they get loose and need replacing.

Pick a robust model. From time to time, ensure the fixings are tight.

Pixied wrote: »

I’ve had a toilet unit move and need to be replaced.

Pick a model that takes large fixings / more than 2 fixings.

Pixied wrote: »

Blockages.

These are often down to people disposing of sanitary wipes and the like in the toilet, when they should be put in the bit. Large clumps of toilet paper can do it also.

If it is a larger person involved, presumably a floor mounted WC is better than a wall-mounted WC.

Pixied

Victor wrote: »

Has the flush been replaced? If not, blame a dud unit / one that needs maintenance. If it has been replaced, tell the users it's a toilet flush, not a pull-start lawnmower.

Pick a robust model. From time to time, ensure the fixings are tight.

Pick a model that takes large fixings / more than 2 fixings.

These are often down to people disposing of sanitary wipes and the like in the toilet, when they should be put in the bit. Large clumps of toilet paper can do it also.

If it is a larger person involved, presumably a floor mounted WC is better than a wall-mounted WC.

Thanks a mill. Much appreciated.

I’ve had the new flush type with the buttons and the old lever type flush.

The 2 in 1 button type was very flimsy, the lever type shanks has been better but I don’t think these are around now. And they do need to take it a bit more easy on the unit.

I might have to get one with two separate flush buttons, maybe that would be better?

More than two fixings and floor mounted is a good idea.

Is there any particular brands that are more robust?

Thanks again.

Victor

I've heard people say the push button ones tend to be fussy.

Pixied wrote: »

Is there any particular brands that are more robust?

I've never paid much interest beyond 'Mr. Builder, the architect wants that one'. Talk to them, they are likely to be helpful.

Wearb

upupup wrote: »

Maybe something like thishttps://www.google.com/search?q=slatted+shed&rlz=1C1CHBF_enIE750IE750&tbm=isch&source=iu&ictx=1&fir=y3jo46U6nq8ZDM%253A%252C8VveMc5hKm3KZM%252C_&vet=1&usg=AI4_-kSX02QmxxezS0dsz8Z1SUe7t3F0Xg&sa=X&ved=2ahUKEwjmmfibsOPhAhXyURUIHanPBlEQ9QEwAnoECAYQCA#imgrc=_&vet=1

MOD NOTE: Cut it out. This is not after hours and it's a difficult enough question to ask without having someone make fun of it.

K.Flyer

Pixied wrote: »

Hi

I’m starting to look at a bathroom renovation. We’ve had lots of problems with toilets over the years. (One of the people who uses it, is on the large side and I think that’s part of the problem

Most definitely only consider a floor standing pan. One that has a broad base that can be well secured to a solid floor.

Nikki Sixx

https://thumbs.gfycat.com/UnitedGregariousIcelandgull-size_restricted.gif

upupup

Wearb wrote: »

MOD NOTE: Cut it out. This is not after hours and it's a difficult enough question to ask without having someone make fun of it.

Apologies.....but "Bomb proof" toilet does suggest that the op is open to a bit of humour.

Pixied

upupup wrote: »

Apologies.....but "Bomb proof" toilet does suggest that the op is open to a bit of humour.

I'm not adverse to a bit of humour. I don't think you intended any harm.

To be honest, I just used the word bombproof, as I'm a bit at the end of my tether with it. It puts stress on the family.

If a mod can close the thread, I'd appreciate it. I probably have enough info now. Thanks.

Wearb

upupup wrote: »

Apologies.....but "Bomb proof" toilet does suggest that the op is open to a bit of humour.

Most likely he is, but comments like yours often encourage more of the same and can completely pull a thread off topic.