Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Issue with built in bookcase/sockets behind it

  • 26-10-2017 1:00pm
    #1
    Registered Users, Registered Users 2 Posts: 293 ✭✭


    Hi,

    A built in bookcase was put in a number of years ago. Wall plug sockets that are behind the bookcase are inaccessible now. Any suggestions on what I should/could do to get access to the sockets? I want to plug out and remove what's there so I need more than just a gap to reach the plug. Pic attached.

    Do I just forget about these sockets?

    Thanks


Comments

  • Registered Users, Registered Users 2 Posts: 10,153 ✭✭✭✭dodzy


    RockDesk wrote: »
    Hi,

    A built in bookcase was put in a number of years ago. Wall plug sockets that are behind the bookcase are inaccessible now. Any suggestions on what I should/could do to get access to the sockets? I want to plug out and remove what's there so I need more than just a gap to reach the plug. Pic attached.

    Do I just forget about these sockets?

    Thanks

    What is actually plugged in there?

    Accessing will involve removal (out of the question I assume) or cutting out access panel.


  • Registered Users, Registered Users 2 Posts: 293 ✭✭RockDesk


    2 extension leads. The tv, DVD, sky lights and other bits are then connected to the extension leads.

    Even if the bottom board was fitted so it could remove I could remove the plug heads and pull them out but no such luck! (The cables are fed into the small panel beside the longer panel)


  • Registered Users, Registered Users 2 Posts: 456 ✭✭peter bermingham


    Hole saw.jpgIf you know how far the plug is back from the front get a hole saw drill in until the saw starts to cut in about 3mm. Then then take out the drill bit in the hole saw and continue cutting the reason ya take out the drill bit in the hole saw is so that you don't drill into the plug. What part of the country are you in, the photo is a hole saw in case you don't know what one is


  • Registered Users, Registered Users 2 Posts: 1,115 ✭✭✭chrismon


    Cut out an access hole is the easiest option.


  • Registered Users, Registered Users 2 Posts: 293 ✭✭RockDesk


    The problem is that I don't actually know if the plug is on the skirting board or further up the wall. It could be either. I was thinking of drilling a small hole in the board to see if I could see the plug. I'd definitely have room to drill in with the hole saw as the board is about 7 inches from the wall (I didn't know what the picture was!)

    I'm in Dublin. I have a friend who would probably have that attachment. I think I might go with that option and see how I get on. Hopefully the socket is on the skirting board and not further up!

    Thanks! :)


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 2,063 ✭✭✭Cerco


    Is that a screw cover cap on the lowest shelf’?
    Looks to me like one. If so it probably secures the bottom ( kick board)
    panel. Check if there are a few of these across the shelf. Praise off with a flat blade and remove the screws. This will allow you to remove the panel and hopefully get access


  • Registered Users, Registered Users 2 Posts: 293 ✭✭RockDesk


    Cerco wrote: »
    Is that a screw cover cap on the lowest shelf’?
    Looks to me like one. If so it probably secures the bottom ( kick board)
    panel. Check if there are a few of these across the shelf. Praise off with a flat blade and remove the screws. This will allow you to remove the panel and hopefully get access

    Yes, you're correct! I hadn't seen it until you said that! The board is nearly off! Thanks a mil :)


Advertisement