Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

HKC - Contact Sensor for tilt & turn window

  • 30-04-2017 04:45PM
    #1
    BigGeorge
    Registered Users, Registered Users 2 Posts: 483 ✭✭


    hey
    have a HKC 1070 system - all going well. However on one window which is tily & turn, whenever the window is left in the tilt position with the alarm deactiviated, the system goes into tamper alarm ....thinking that the contact is being tampered with

    Any suggestions on how to stop this happening?
    thanks folks


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Is it somehow catching the lid or putting pressure on the lid when you put the door in that position?
    Would you be able to post up a pic of it?


  • #3
    BigGeorge
    Registered Users, Registered Users 2 Posts: 483 ✭✭BigGeorge


    hope this works
    it clears it OK, the gap is small though back to the contact box


  • #4
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    I'd say there is a loose connection on the tamper loop either inside that junction box or inside the contact itself.


  • #5
    altor
    Registered Users, Registered Users 2 Posts: 12,024 ✭✭✭✭altor


    BigGeorge wrote: »
    hey
    have a HKC 1070 system - all going well. However on one window which is tily & turn, whenever the window is left in the tilt position with the alarm deactiviated, the system goes into tamper alarm ....thinking that the contact is being tampered with

    Any suggestions on how to stop this happening?
    thanks folks

    Does the zone stay tampered when that window is open?
    If so the sensor may be wired into the tamper.

    www.altor.ie



Advertisement