Help with ripspeed wiring

robust

Hi all, I recently bought a 2nd hand RIPSPEED 100W SUBWOOFER PSR135A
It's the underseat model.
Problem is it did not come with a power connector.
Would anyone know which pins are for the dc +/- and the control wire.
Please see pics.
Cheers...


https://us.v-cdn.net/6034073/uploads/attachments/208467/409558.JPG

colm_mcm

Might be of some use.

robust

Cheers, I found that pic...doesn't it look like 2 black wires, 1 blue and 2 yellow.
The blue must be the control (from the head unit) beyond that a high level input x2 wires and power +&- ???
Any ideas anyone?

colm_mcm

I'd imagine the high level ones have been removed from that plug.

robust

Your spot one they are. I'll have to follow the tracks on the circuit board.
You'd think with everything on the internet I could find the pinout?

TherapyBoy

If the picture Colm posted is from a Ripspeed wiring harness for an amplifier the same as yours, 2x black wires are earth, 2x yellow wires are permanent 12v & the blue is your switch from the headunit. Don't ask me why they double the power & earth but lots of manufacturers do it for their active subs.

Where did you get the sub/amp? Did you see it working before you bought it?

robust

Yea it looks like the connector is common to lots of makes.
I didn't see it working, got it cheap from a car breakers, took a chance.

robust

I may have it sorted. Have a look at this pic...