Compatible smoke detectors with SPC 4320

johnny_adidas

I have two mains powered smoke detectors I am replacing and as I have an SPC 4320 alarm panel and wireless kit, just wondering what options are there in terms of Siemens detectors for integration with this system?

I should also mention I have Risco wireless inertias so there is a Risco receiver on the panel if a Risco option is more available/less expensive, but I'd imagine this wouldn't give me the same control through the Siemens control app.

Finally Id also appreciate a recommendation for similarly replacing a mains heat detector in the kitchen

KoolKid

Hi

If you are wiring the smoke detectors any 12 volt detector with a relay will work.
Risco have a quick bridge style receiver that will let you connect Risco wireless devices into wired zones at the panel or expander.

johnny_adidas

KoolKid wrote: »

Hi

If you are wiring the smoke detectors any 12 volt detector with a relay will work.
Risco have a quick bridge style receiver that will let you connect Risco wireless devices into wired zones at the panel or expander.

Hi, wireless I'm afraid as there is only mains power cables at the detector locations

KoolKid

You could add SiWay SPC smoke detectors wirelessly.

johnny_adidas

Thanks for that. Found them

https://www.securitywarehouse.co.uk/catalog/siemens-siway-radio-module-p-4635.html

https://www.securitywarehouse.co.uk/catalog/siemens-smoke-alarm-device-hdv3007os-p-5017.html