Shower rail + glue

y0ssar1an22

I got a new shower rail which I'm gonna glue to the tiles instead of drilling through the tiles.
My question....is there a specific glue i should be looking at, considering the various elements? Tile, plastic fixture, steam and condensation from the shower.
Or would a standard 'no more nails' do the job?

Shower rail is not especially heavy.
Not drilling through tile because of lack of experience and tools, plus irreversible.

Thanks.

Calahonda52

What do you mean by shower rail?
Picture?

y0ssar1an22

Calahonda52 wrote: »

What do you mean by shower rail?
Picture?

This here:
http://www.argos.ie/static/Product/partNumber/8326858/c_1/1%7Ccategory_root%7CHome+and+furniture%7C14417894/c_2/3%7C19805481%7CBathroom%7C14418043/c_3/4%7Ccat_14418043%7CShower+curtains+and+rails%7C14418071.htm

The 2 guys that get attached to the wall are made of plastic

colm_mcm

I wouldn't want to be relying on the tile adhesive to hold the tile on, and the strength of the tile not to crack.

you can get telescopic rails that have rubber feet on the ends. you twist the rail and it stays up with the tension.

I used one of these before and had no bothers with a shower curtain and a good few shirts on hangers drying.

Sleeper12

It needs to be drilled and plugged. Even Tec 7 will fail eventually with the opening and closing.

Drilling with a tile bit takes all of 2 minutes

Water John

Sugru, the bonding compound invented by that girl from Kilkenny should do the trick.