Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

insulation material inside door of SIME 1R3 boiler

  • 09-03-2016 9:00pm
    #1
    Registered Users, Registered Users 2 Posts: 404 ✭✭


    I opened the door of my sisters kerosene boiler today, an old sime 1r3. There was a layer of insulation material inside the door which fell apart when I removed it. Where could I get some of this ? Thanks


Comments

  • Closed Accounts Posts: 1,590 ✭✭✭agusta


    A plumber merchants would have them,About 15 to 20 euro,It is probally a 10mm board


  • Registered Users, Registered Users 2 Posts: 404 ✭✭king2


    Ok thanks, so you just buy a sheet and cut it to size is it?


  • Closed Accounts Posts: 1,590 ✭✭✭agusta


    Yes,i think they come in something like 16" X 16",or maybe 14" x 14".If there is a Heatmerchants near you they would have it.


  • Hosted Moderators Posts: 3,496 ✭✭✭DGOBS


    Just ask for 'furnace board' (or insulfrax)


  • Registered Users, Registered Users 2 Posts: 404 ✭✭king2


    Got it today €15.00 jpmatthews. Actually had to get 2. While cleaning the top fire box I noticed there was alot of soot in the lower burner area as the burner was removed. I opened the panel and the gasket fell apart also! Does this happen everytime the panels are removed to clean the boiler? That board seems quite brittle, even when new, presume there's nothing else that can be used?


  • Advertisement
  • Closed Accounts Posts: 1,590 ✭✭✭agusta


    king2 wrote: »
    Got it today €15.00 jpmatthews. Actually had to get 2. While cleaning the top fire box I noticed there was alot of soot in the lower burner area as the burner was removed. I opened the panel and the gasket fell apart also! Does this happen everytime the panels are removed to clean the boiler? That board seems quite brittle, even when new, presume there's nothing else that can be used?
    Yes the gasket board are quite brittle.They will perish over a long time.The boards dont have to be changed every time you remove the door.They will last a good few years if your carefull when removing and dont over tighten when refitting..If there is black soot in the boiler the burner is incorrectly set up making it inefficient


Advertisement