Advertisement
Private Profiles - an update on how they will be changing here
We've partnered up with Nixers.com to offer a space where you can talk directly to Peter from Nixers.com and get an exclusive Boards.ie discount code for a free job listing. If you are recruiting or know anyone else who is please check out the forum here.

What's In Your Hand Today?

18911131424

Comments

  • Closed Accounts Posts: 588 jno547


    Patww79 wrote: »
    This post has been deleted.

    Have you a backup? If your staying with the istick family then the Pico (removable battery) or iPower (built in) are worth considering.


  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Closed Accounts Posts: 588 jno547


    Patww79 wrote: »
    This post has been deleted.

    Both those isticks are good performers and good value also

    http://www.thebestshop.eu/shop/vv-mods/746-eleaf-ipower-80w-5000mah-tc-express-kit.html
    http://www.thebestshop.eu/shop/vv-mods/739-eleaf-istick-pico-75w-express-kit.html

    If your after another tank then the Cubis gives a great MTL vape using the 1.5 coil, a little gurgly after filling but I posted a link to a cure for that a few posts back.

    http://www.thebestshop.eu/shop/clearomizers/680-joyetech-cubis-tank.html

    Don't forget irishvape for 10% off at the checkout.:)


  • Registered Users Posts: 2,555 youdipstick


    jno547 wrote: »

    That's a lot of work,sod that for a game of cowboys:D:D that geezer looks like one of those frenchies in Southern Comfort :D:D:D
    Does Joytech have a rebuildable coil that would screw into the Aio...like the CLR in the ego one mega...


  • Closed Accounts Posts: 588 jno547


    That's a lot of work,sod that for a game of cowboys:D:D that geezer looks like one of those frenchies in Southern Comfort :D:D:D
    Does Joytech have a rebuildable coil that would screw into the Aio...like the CLR in the ego one mega...

    http://www.thebestshop.eu/shop/clearomizers/679-joyetech-cubis-bf-rba-head.html

    I haven't used it but you can let me know your thoughts on it if you purchase.
    It is a bit laborious getting the coils set but I don't fill that often as I only use the Cubis for mtl at 18w so it's easy on juice.


  • Advertisement
  • Closed Accounts Posts: 588 jno547


    That's a lot of work,sod that for a game of cowboys:D:D that geezer looks like one of those frenchies in Southern Comfort :D:D:D
    Does Joytech have a rebuildable coil that would screw into the Aio...like the CLR in the ego one mega...

    One of my favourite films btw:D


  • Registered Users Posts: 2,555 youdipstick


    jno547 wrote: »
    One of my favourite films btw:D

    I still remember watching it in the 80's on a pirate tape & the picture was sh1te but still enjoyed it... I have watched it again since.


  • Closed Accounts Posts: 588 jno547


    I still remember watching it in the 80's on a pirate tape & the picture was sh1te but still enjoyed it... I have watched it again since.

    Deliverance was another in the same vein and also worth a watch.
    Apologies,don't intend to hijack the thread with film talk.:)


  • Registered Users Posts: 6,315 ✭✭✭ jonski


    Overall thoughts on the Evic AIO Doc ? Thinking of getting that or the Releaux 2/3


    And I'm also of the generation that watched those two movies first time around .


  • Closed Accounts Posts: 588 jno547


    jonski wrote: »
    Overall thoughts on the Evic AIO Doc ? Thinking of getting that or the Releaux 2/3


    And I'm also of the generation that watched those two movies first time around .

    I like it,performs very well with the 0.5 coil at about 30w,its a cubis coil so there's a good choice available, I didn't use tc but I'd imagine it's up to par, my only gripe is single 18650, anything over 30w and it drops fast but it's very easy to swap them out.
    Very easy to take apart,tank just slips out for cleaning,oh and it can also be used as a mod with the adapter supplied with your own tanks or drippers.
    Overall very versatile and compact.

    Edit
    The 2/3 is excellent, one of my complaints about it would be the battery door, feels flimsy and is very springy when closed,would have much preferred a magnetic system.


  • Advertisement
  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Registered Users Posts: 318 ✭✭ Allan45121


    You need to buy some high drain flat top batteries.


  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Closed Accounts Posts: 588 jno547


    Patww79 wrote: »
    This post has been deleted.

    Glad you like that little setup,it works well together. What type of battery are you using?. Is it a button/nipple top by any chance?


  • Closed Accounts Posts: 588 jno547




  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Closed Accounts Posts: 588 jno547


    Patww79 wrote: »
    This post has been deleted.

    The flat top battery will allow the cap to screw down fully and I wouldn't use old batteries in it,just to be safe.


  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Closed Accounts Posts: 26,661 ✭✭✭✭ OldMrBrennan83


    This post has been deleted.


  • Registered Users Posts: 410 ✭✭ IRISH OS1R1S


    I'm loving these tiny little setups for out and about.

    Apart from a mechanical mod with less battery life, no usb charging and no battery protection, I think this is as small or close to the smallest as it can get. Vapes like a champ too.

    If you went with a mechanical mod you could probably save between 1.5 and 2.5cm in height, but lose out on all the advantages listed above. Besides this thing is completely concealed when I make a fist and I haven't particularly big hands. :)

    Battery: Ijust2 Mini 1100mah - $12.99 http://vapenw.com
    Tank: Steam Tribe Boss 3.5ml - $14.04 https://www.fasttech.com (comes with rebuild-able coil)

    3.5 inches or 9cm tall.

    Untitled-1_zpskwv3jzcn.jpg


  • Advertisement
  • Registered Users Posts: 410 ✭✭ IRISH OS1R1S


    Just to add, that tank is a fabulous mouth to lung vape.


  • Registered Users Posts: 6,744 ✭✭✭ Thecageyone


    What kind of delivery times are you getting from FT? Might be ordering a few bits on there - Last time was in around 2 weeks.


  • Registered Users Posts: 410 ✭✭ IRISH OS1R1S


    What kind of delivery times are you getting from FT? Might be ordering a few bits on there - Last time was in around 2 weeks.
    They are normally very slow as in 3 to 4 weeks, but the last 2 months my orders are arriving within 2 weeks give or take a day or 2.


  • Registered Users Posts: 6,744 ✭✭✭ Thecageyone


    eyeing the Rx 2/3, no hurry for it really, but it can be like waiting for Christmas when you order something nice :D


  • Closed Accounts Posts: 588 jno547


    eyeing the Rx 2/3, no hurry for it really, but it can be like waiting for Christmas when you order something nice


    Nice mod, lovely in the hand in 2 battery mode. One thing I was a bit dubious about was the durability of the battery door hinge/catch method,it felt weak for something that will take a lot of use, would have preferred a magnetic system instead. Other than that a cracking mod.


  • Registered Users Posts: 2,555 youdipstick


    eyeing the Rx 2/3, no hurry for it really, but it can be like waiting for Christmas when you order something nice :D

    Also,if you use coils 1.2 & upwards,the wattage is restricted because it will only give 6v in 2 battery mode,I heard this on YT but still looks good except for the door as Doc says.


  • Registered Users Posts: 1,420 ✭✭✭ dohouch


    What kind of delivery times are you getting from FT? Might be ordering a few bits on there - Last time was in around 2 weeks.
    2 packages arrived here today, 1 was 12 days 1 was 18 days


  • Registered Users Posts: 1,420 ✭✭✭ dohouch


    Authentic ATHENA eNVy Plus 75W VW TC APV Box Mod


    Is light in the hand and must say I like the feel of it


    Variable wattage: 5W-75W
    Temperature control: 100'C-300'C / 200'F-600'F
    Output voltage: 0.0V-6.7V
    Resistance range: Ni200 support 0.05-0.35ohm, Titanium coils support 0.1-0.8ohm, stainless steel coil support 0.2-1.0ohm, normal coil support 0.1 - 4.0 ohm
    OLED Display
    Short circuit protection
    Low voltage protection
    510 threading connection
    Spring-loaded center pin
    Hoses single 18650 battery (battery sold separately)

    nwcuh.jpg


  • Registered Users Posts: 6,315 ✭✭✭ jonski


    Whats in my hand today you say ?

    The Evic AIO in silver I say ! , looks lovely , feels lovely , works Like an evic mini , it's all good :)

    I'd put up a photo but ye know what they look like .


  • Advertisement
  • Registered Users Posts: 1,580 ✭✭✭ moleyv


    jonski wrote:
    I'd put up a photo but ye know what they look like .


    I was just thinking where is the damn photo, I'll have to google it :pac:


Advertisement