FS; Tiagra mechs/crank, DT shifters, Wheelset

OldBean

Clearing out some gear after the arrival of N+1.

Pretty fair prices IMO, most of the below has seen pretty limited use. As a job lot, it would go a long way towards getting a frameset on the road.

Tiagra 10 speed front mech (Grey/Silver) - 10

Tiagra 10 speed rear mech (Grey/Silver) - 10

Tiagra 10 speed crankset & bottom bracket (Grey/Silver) - 50

Genesis Stem (Black) - 10

These have just come off a bike I've picked up second hand. Everything working perfectly and in good condition.

Dia Compe ENE DT 9 speed Shifters (Silver) - 25

These came off my tourer last year after about 4 or 5 months use..

Mavic rims with a Tiagra 9 speed hub & Velox tape - 35

SRAM PG950 11-26t 9 speed cassette - 10

SRAM PC991 9 speed chain - 5

These are currently pretty much all attached. There's about 1200km on them. Wheelset is cheap, cheerful and bombproof, there's some wear on the braking surface, and a scratch or two too, but whether it's on the turbo or around town, they're pretty handy. The wear on the cassette matches the chain, makes sense to bundle them in together.

I'll have photos up by next Monday at the latest.

Would hand over the whole lot for 130, or part trade for a Garmin speed/cadence sensor, and/or a nice handlebar along the lines of a Ritchey Classic or Salsa Cowbell.

Based in Dublin, collection near city centre or drop-off pretty much anywhere around central Dublin can be arranged. Free from next Tuesday onwards to do so.

paul a newman

would like the wheels, cassette and chain for 40E, can collect tomorrow

OldBean

paul a newman wrote: »

would like the wheels, cassette and chain for 40E, can collect tomorrow

I'm away until next week I'm afraid! Any use to you?

seanin4711

what is chainset 53/34?
172.5?
Thanks
John
looking to build up a frame

paul a newman

next week is fine, let me know what day suits

OldBean

seanin4711 wrote: »

what is chainset 53/34?
172.5?
Thanks
John
looking to build up a frame

I think it's 170, and 53/34 - I'm away from Dublin with work for a few days, will confirm Sunday night if that's ok?


Paul, Monday or Tuesday ok with you?

cython

seanin4711 wrote: »

what is chainset 53/34?
172.5?
Thanks
John
looking to build up a frame

OldBean wrote: »

I think it's 170, and 53/34 - I'm away from Dublin with work for a few days, will confirm Sunday night if that's ok?


Paul, Monday or Tuesday ok with you?

Not to butt in, but I very much doubt that the chainset has the above combination, as 53 is the large from a standard double, with 34 being the small from a compact - most derailleurs will support a 16 tooth gap at most, never mind 19! Would guess it's either 53/39 or 50/34 (to make one of the numbers correct), but maybe something in between like 52/36.

seanin4711

OldBean wrote: »

I think it's 170, and 53/34 - I'm away from Dublin with work for a few days, will confirm Sunday night if that's ok?


Paul, Monday or Tuesday ok with you?

numbers should be on crank,
can you confirm,
thanks
John

OldBean

cython wrote: »

Not to butt in, but I very much doubt that the chainset has the above combination, as 53 is the large from a standard double, with 34 being the small from a compact - most derailleurs will support a 16 tooth gap at most, never mind 19! Would guess it's either 53/39 or 50/34 (to make one of the numbers correct), but maybe something in between like 52/36.

Yep, you're most probably correct, though I did say I think - I'm away for a few days and had to leave earlier than expected due to work commitments, I'll let you know specifics when I get back Sunday night/Monday morning.

I've literally only ridden that combination of components for 2/3 minutes from picking up the bike, back to my house where everything was swapped out so apologies for the lack of detail. I'd say it's most likely a 50/34.

paul a newman

whenever suits you, live in Raheny, working in Glasnevin nexy week, if anywhere around there suits, ta Paul

OldBean

PM sent, Paul.

Chainset is 34/50 and 170mm. Pics below:















Front mech pic up later, along with the wheelset if Paul doesn't take them.

seanin4711

Hi,
needed a 172.5 chainset,not to worry.
both mechs I am after and wheelset ,next in line.

OldBean

No worries Sean - You're still interested in the mechs then? Passing through Dublin any time soon?

seanin4711

OldBean wrote: »

No worries Sean - You're still interested in the mechs then? Passing through Dublin any time soon?

got a mate in clondalkin near dunnes the Mill.
otherwise you passing through Galway?

OldBean

I'm cycling to Galway, but it's late next month.

Otherwise, I'm happy to pop out to your mate this week? It's only a spin out the road for me as long as you're happy with him looking over the mechs.

OldBean

Wheelset, cassette and chain gone to Paul A Newman - Well wear.

Sean, are the mech's still of interest?

seanin4711

OldBean wrote: »

Wheelset, cassette and chain gone to Paul A Newman - Well wear.

Sean, are the mech's still of interest?

I want em!

OldBean

Great! €20 and I'll drop them out to your mate, or can hold on to them 'til I'm passing through next month?

seanin4711

no rush with them so when your in Galway that will do.
Payment want to wait for COD or paypal?
johnny

OldBean

Will pop you over a PM.

OldBean

Mechs available again, along with cranks, shifters and stem.

onthefringe

OldBean wrote: »

Clearing out some gear after the arrival of N+1.

Pretty fair prices IMO, most of the below has seen pretty limited use. As a job lot, it would go a long way towards getting a frameset on the road.

Tiagra 10 speed front mech (Grey/Silver) - 10

Tiagra 10 speed rear mech (Grey/Silver) - 10

Tiagra 10 speed crankset & bottom bracket (Grey/Silver) - 50

Genesis Stem (Black) - 10

These have just come off a bike I've picked up second hand. Everything working perfectly and in good condition.

Dia Compe ENE DT 9 speed Shifters (Silver) - 25

These came off my tourer last year after about 4 or 5 months use..





Mavic rims with a Tiagra 9 speed hub & Velox tape - 35

SRAM PG950 11-26t 9 speed cassette - 10

SRAM PC991 9 speed chain - 5

These are currently pretty much all attached. There's about 1200km on them. Wheelset is cheap, cheerful and bombproof, there's some wear on the braking surface, and a scratch or two too, but whether it's on the turbo or around town, they're pretty handy. The wear on the cassette matches the chain, makes sense to bundle them in together.

I'll have photos up by next Monday at the latest.

Would hand over the whole lot for 130, or part trade for a Garmin speed/cadence sensor, and/or a nice handlebar along the lines of a Ritchey Classic or Salsa Cowbell.

Based in Dublin, collection near city centre or drop-off pretty much anywhere around central Dublin can be arranged. Free from next Tuesday onwards to do so.

Did you ever get sorted for a garmin sensor
I'd swap 3 of em( yes 3!) for the mechs and crank
You'd have one for all yer bikes then;-)

OldBean

Definitely up for swapping one sensor kit for the mechs, and maybe some cash for the cranks?

onthefringe

Is the front. Mech braze or band on?
If band - what size ?

OldBean

Band on, as far as I know 28.6mm/31.8mm. I'm not sure if I have spacers in my spares box, but will have a peek if you're interested.

onthefringe

OldBean wrote: »

Band on, as far as I know 28.6mm/31.8mm. I'm not sure if I have spacers in my spares box, but will have a peek if you're interested.

Fair enough
1 sensor for the mechs?? If you have shims it would be great
Happy with that if you are

OldBean

Great! Just to confirm, it's the garmin speed/cadence sensor?

Based in Dublin? If so, happy to meet up and make sure the mech will fit before you commit? Are you after the 28 or 31 size on it?

onthefringe

OldBean wrote: »

Great! Just to confirm, it's the garmin speed/cadence sensor?

Based in Dublin? If so, happy to meet up and make sure the mech will fit before you commit? Are you after the 28 or 31 size on it?

will pm now
either or...
how much you need for the crank?

OldBean

Mechs and crank/BB gone to OnTheFringe - Pleasure doing business with!

Tiagra 10 speed front mech (Grey/Silver) - 10

Tiagra 10 speed rear mech (Grey/Silver) - 10

Tiagra 10 speed crankset & bottom bracket (Grey/Silver) - 50

Genesis Stem (Black) - 10


Dia Compe ENE DT 9 speed Shifters (Silver) - 25

Mavic rims with a Tiagra 9 speed hub & Velox tape - 35

SRAM PG950 11-26t 9 speed cassette - 10

SRAM PC991 9 speed chain - 5

Down to the stem and downtube shifters.

joxerjohn

Hi Old Bean. Are the mechs and chrankset & BB still available ? If so I will offer asking subject to inspection.

Sorry didn't read latest treads I see they are gone !

onthefringe

ill take the genesis stem..
forgot to ask about it last week..
what length is it??

cheers

OldBean

onthefringe wrote: »

ill take the genesis stem..
forgot to ask about it last week..
what length is it??

cheers

It's a 90mm job - Shoot me a text whenever you're going to be swinging by again and we'll arrange something! Cheers!

joxerjohn wrote: »

Hi Old Bean. Are the mechs and chrankset & BB still available ? If so I will offer asking subject to inspection.

Sorry didn't read latest treads I see they are gone !

Yep, sorry John, I'll be down to just the down-tube shifters after OTF picks up the stem.