Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Satlink WS6908SE signal meter

  • 01-03-2015 9:26am
    #1
    Technofobe
    Closed Accounts Posts: 474 ✭✭


    HI All
    Just got one of these meters as I suspected my dish had moved in the wind
    instructions are a bit limited
    I used to install MMDS a long time ago

    My question is is there any particular channel that is best for aligning sky
    I did read somewhere to check both H and V stations
    Having spent about an hour tinkering this is about the best I could do


    WP_20150227_001_zpsehbbyalq.jpg

    WP_20150227_003_zps7mwogrfg.jpg


Comments

  • #2
    Thurston?
    Closed Accounts Posts: 2,278 ✭✭✭Thurston?


    Checking V & H is to get the LNB skew right, though this can't be fine tuned on a Sky type dish.

    AFAIA the signal from Eutelsat 28A is skewed differently than that of the Astra satellites, so I'd check a set of overlapping V & H frequencies from each, maybe need a compromise position. Eutelsat 28A probably won't be there much longer anyway.

    Worth checking a TP from each sub-band while you're at it, just to make sure the LNB is working on all 4.


  • #3
    Technofobe
    Closed Accounts Posts: 474 ✭✭Technofobe


    Thurston? wrote: »
    Checking V & H is to get the LNB skew right, though this can't be fine tuned on a Sky type dish.

    AFAIA the signal from Eutelsat 28A is skewed differently than that of the Astra satellites, so I'd check a set of overlapping V & H frequencies from each, maybe need a compromise position. Eutelsat 28A probably won't be there much longer anyway.

    Worth checking a TP from each sub-band while you're at it, just to make sure the LNB is working on all 4.
    Thanks for that :-)


Advertisement