Customised Ruger 10/22 Receiver/action & pillor bedded Boyds EVO stock

clivej

I have a new 10/22 Custom Receiver on the way so I'm sell my Ruger 10/22 receiver with Boyds EVO stock.

The Ruger 10/22 Receiver has been customised to enhance and bring the best out of it. The small single action screw has been replaced with a 6mm allen head bolt. With the bedded pillar in the stock it means that the receiver can be really tightened down without fear of compressing the timber stock, or stripping threads.

A rear cleaning hole has been put in the back of the receiver to aid in cleaning the barrel using a rod. BUT this also fits into a stud that was added to the stock to really make the receiver a tight fit in the Boyds Evo stock.

A Tactical Solutions 15MOA picatinny rail is fitted to the receiver and is included. Extra big 4mm screws are used to fit this to keep it tight and secure.
Stock also has a Bisley adjustable butt plate going with the deal

The pillar top in the Boyds Evo stock is fitted such that the receiver sits down true, tight, and square in the stock. A PERFECT FIT IN FACT.

A lot of work has gone into the customising of the receiver and stock, and this can be seen in the accuracy that is capable from this setup.

Looking to get €299 ovno.

Photo's - Only the receiver and stock are for sale.

adrian5765

hi clive how much u selling the action for on its own buddy

clivej

Talk to you on Saturday.

But as the receiver and stock go together as one unit, there's a good tight union between them, it' would be hard to separate them. Lot of work had gone into the customising.
Already had someone looking to buy the stock.

clivej

A couple of tyre kickers looking at this so a bump may help them.

clivej

Now SOLD pending founds