How do i increase my range of my sniper ?

mark.1

hi i have a well mb 01 and want to increase the range and accuracy of my gun?

how do i ?

thanks
mark

YbFocus

mark.1 wrote: »

hi i have a well mb 01 and want to increase the range and accuracy of my gun?

how do i ?

thanks
mark

Tightbore and a suitable hop up rubber Mark.

Make sure there is a good air seal to the barrel so no efficency is lost from leaks.

They're the biggest changes, tightbore allows less air escape around the bb which will cause turbulence and loose fps.
A good hop up rubber allows a better more accurate hold on the bb so you get the straightest possible release on firing.

I nearly always use guarder clear, I find them great.

Hope this helps man

mark.1

YbFocus wrote: »

Tightbore and a suitable hop up rubber Mark.

Make sure there is a good air seal to the barrel so no efficency is lost from leaks.

They're the biggest changes, tightbore allows less air escape around the bb which will cause turbulence and loose fps.
A good hop up rubber allows a better more accurate hold on the bb so you get the straightest possible release on firing.

I nearly always use guarder clear, I find them great.

Hope this helps man

thanks man what hop up and tight bore u reccomend ?
links would be appreciated

YbFocus

mark.1 wrote: »

thanks man what hop up and tight bore u reccomend ?
links would be appreciated

I like madbull tightbores like the following. This suits your gun.

http://www.fire-support.co.uk/product/madbull-black-python-ver2-603-mm-tight-bore-barrel-650mm

At 6.03 it's not the tightest you can get as you can get 6.01's. Personally I don't use them as I think they may be a little too tight and jam on a bad bb if you were unlucky enough.

The guarder clear hop up is what I use, it's 50° and perfectly suitable for our Irish limit. That said like any rubber you need to experiment with different ones to find which is best for your gun

http://www.airsoftatlanta.com/Guarder-Airsoft-Hopup-Bucking-Clear-p/34410.htm

mark.1

YbFocus wrote: »

I like madbull tightbores like the following. This suits your gun.

http://www.fire-support.co.uk/product/madbull-black-python-ver2-603-mm-tight-bore-barrel-650mm

At 6.03 it's not the tightest you can get as you can get 6.01's. Personally I don't use them as I think they may be a little too tight and jam on a bad bb if you were unlucky enough.

The guarder clear hop up is what I use, it's 50° and perfectly suitable for our Irish limit. That said like any rubber you need to experiment with different ones to find which is best for your gun

http://www.airsoftatlanta.com/Guarder-Airsoft-Hopup-Bucking-Clear-p/34410.htm

thanks and
would that one do ?
http://www.airsoftguns.ie/precision-barrels-outer-barrels/378-black-python-603mm-tight-bore-barrel-590mm.html

YbFocus

mark.1 wrote: »

thanks and
would that one do ?
http://www.airsoftguns.ie/precision-barrels-outer-barrels/378-black-python-603mm-tight-bore-barrel-590mm.html

Should do, that's the exact barrel I run in my g3. Just do a bit of googling and see does it suit, someone out there will have done it before and written about it

mark.1

YbFocus wrote: »

Should do, that's the exact barrel I run in my g3. Just do a bit of googling and see does it suit, someone out there will have done it before and written about it

will this one do even do its an aeg one and i have a sniper ?
http://shop.ehobbyasia.com/guarder-improved-hop-up-bucking-for-aeg-50-hardness.html#.UyXFVP

YbFocus

mark.1 wrote: »

will this one do even do its an aeg one and i have a sniper ?
http://shop.ehobbyasia.com/guarder-improved-hop-up-bucking-for-aeg-50-hardness.html#.UyXFVP

Yep Mark the units are different but they all use the same rubbers

mark.1

YbFocus wrote: »

Yep Mark the units are different but they all use the same rubbers

thanks mate

YbFocus

mark.1 wrote: »

thanks mate

No probs Mark, glad to help!

T4RGET

YbFocus wrote: »

No probs Mark, glad to help!

sniper rifles don't use the same rubbers as AEG's mate. Now your Sniper rifle might do, but most sniper rifles don't.
There's a PDI hop up unt you can buy which will allow the rifle to take a standard AEG barrel and hop up rubber but they're expensive.

YbFocus

T4RGET wrote: »

sniper rifles don't use the same rubbers as AEG's mate. Now your Sniper rifle might do, but most sniper rifles don't.
There's a PDI hop up unt you can buy which will allow the rifle to take a standard AEG barrel and hop up rubber but they're expensive.

Christ I've never met one that didn't

Mark if that rubber doesn't suit I'll buy it off you as they're all I use.
Sorry if it doesn't fit

T4RGET

YbFocus wrote: »

Christ I've never met one that didn't

Mark if that rubber doesn't suit I'll buy it off you as they're all I use.
Sorry if it doesn't fit

Bar 10/ VSR style rifle don't generally use the same type of rubber. some other models may but seeing that's the most common platform I'm assuming that's what the OP has. It's a Well 01 I know but in college right now and they block anything like that :P

YbFocus

T4RGET wrote: »

Bar 10/ VSR style rifle don't generally use the same type of rubber. some other models may but seeing that's the most common platform I'm assuming that's what the OP has. It's a Well 01 I know but in college right now and they block anything like that :P

Well that's embarrassing

SolidSpoons

*Most* bolt actions use VSR/GBB hop up rubber. If the well is a clone of a TM then it would do. Nineball hop rubber and PDI, KM, of TK barrel would make the most of what you have.

brenak47

The well mb01 is the same as the mauser that i have.It will not take aeg or vsr hop up rubbers and they don't do upgraded ones.The barrel u was with the standard hop up is a madbull aps2 499mm barrel hobby do them.Any upgrade parts u need look for aps2(piston/guide etc).As tar4et has mentioned u will need to go to pdi for the hop up if u want to use aeg hop up rubbers.This will cost u about 120 euro or so just for the hop up unit(80 euro approx) plus 40 or so for a good aeg barrel.My own gun does 65-70m approx with alot of mods done to the gun with a standard hop unit(modded) and madbull barrel.Hope this helps.