mp5 pdw issues

shnburn

just got the b&t mp5 pdw when i fire it sounds like the first 3 bbs are jamming then it fires out 4bbs in one go is it an easy fix or should i bring it back to shop only bought it yesterday

thermo

Bring it back.

shnburn

thermo wrote: »

Bring it back.

planning to on saterday was hoping it might be easy fix to save me 3 hours saterday

Drachnien

if you try an fix it you void the warranty so its not worth even trying with a new AEG. Just bring it back to the shop and get it replaced.

shnburn

taking it back out to them now

shnburn

shnburn wrote: »

taking it back out to them now

turned out to be faulty hop up rubber

Drachnien

cool so all good now then ?

shnburn

Drachnien wrote: »

cool so all good now then ?

i thought it was still same problem with it now im home

T4RGET

what BB's you using?

shnburn

T4RGET wrote: »

what BB's you using?

.2g gold fire bbs

shnburn

Drachnien wrote: »

cool so all good now then ?

il have it with me when i meet u later for the silencer

T4RGET

shnburn wrote: »

.2g gold fire bbs

hmm they're not really bad BB's. Maybe try some KA or Excel BB's? it definitely sounds like a hop up problem though. Unless it's a tappet plate problem. It may be broke and caught in an awkward position allowing BB's through the odd time.

shnburn

T4RGET wrote: »

hmm they're not really bad BB's. Maybe try some KA or Excel BB's? it definitely sounds like a hop up problem though. Unless it's a tappet plate problem. It may be broke and caught in an awkward position allowing BB's through the odd time.

dunno whats wrong with it going have to go back agen with it i always ise gold fire and never had a problem with them

ShRT

Are the first three bb's getting stuck - If you tilt the gun will they roll out the front of the barrel?
Did you take the hop off completely? When they do come out what kind of power do they have - do they dribble out or have normal velocity?

Still take it back to the shop though for warranty but might be useful info to give them

shnburn

ShRT wrote: »

Are the first three bb's getting stuck - If you tilt the gun will they roll out the front of the barrel?
Did you take the hop off completely? When they do come out what kind of power do they have - do they dribble out or have normal velocity?

Still take it back to the shop though for warranty but might be useful info to give them

ye 3 get stuck in barrel they shoot out or roll iv tried changing hop up in few diferent positions and didnt help at all going have to take it back a second time

bigjim3321

clean it check the hop up

shnburn

bigjim3321 wrote: »

clean it check the hop up

its brand new so if i start opening ot o lose warranty on it

thermo

Did you try different mags?

shnburn

thermo wrote: »

Did you try different mags?

tried my friends mags but they didnt fit from them being spray painted

shnburn

turned out to be the mag part that feeds bbs into gun was strangely shorter then its meant to be

ShRT

Out of interest, did the mag release work correctly? Have an issue with an mp5 and the cyma 560 round hicaps which sounds similar to that and it also causes the catch which grabs the magazine to not seat properly.

shnburn

ShRT wrote: »

Out of interest, did the mag release work correctly? Have an issue with an mp5 and the cyma 560 round hicaps which sounds similar to that and it also causes the catch which grabs the magazine to not seat properly.

it came with a 68 rnd mag the round bit where the bbs go from mag into gun was half the hight it should have been

ShRT

Thanks for that. Confirms one of my theories about the problem

shnburn

ShRT wrote: »

Thanks for that. Confirms one of my theories about the problem

they dont seem to work with small mags but my friends 200 rnd hi cap worked perfect