Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Sa80 upgraded switch..?.?

  • 02-06-2013 11:55pm
    #1
    jimeryan22
    Banned (with Prison Access) Posts: 2,170 ✭✭✭


    Hi lads, Have an L85 A1.. G&G , bought recently, was doing this usual bollox of firing half alright now and again on semi, mostly alright on full auto,
    Found a vid that said about cutting away a wire from loom, and unsolder where it went to outside of switch casing, oh and bend in the prong on the inside as its now doing nothing.... Now this worked great, and the gun pretty much is perfect. But, It does still miss an odd one on semi now. I know from when I had switch apart that the remaining contacts were a little worn, but like electrically if someone gets me, Burnt away like.... So after all this long guff... Anyone know, is there a heat resistant one you can get, or..?
    Also let me know of good upgrades as that's next...
    Thanks all


Comments

  • #2
    jimeryan22
    Banned (with Prison Access) Posts: 2,170 ✭✭✭jimeryan22


    No body..?


  • #3
    DeBurca
    Registered Users, Registered Users 2 Posts: 9,752 ✭✭✭DeBurca


    jimeryan22 wrote: »
    No body..?


    Be patient give your fellow Boardies time to wake up it’s a holiday weekend


  • #4
    defenderdude
    Closed Accounts Posts: 2,502 ✭✭✭defenderdude


    You will find the switch contacts tend to burn out quickly with the g&g sa80. Its a common issue among others with both models. Expect to replace them as a matter of course. A fix might be to install a MOSFET into it - should prolong the life of the contacts.


  • #5
    jimeryan22
    Banned (with Prison Access) Posts: 2,170 ✭✭✭jimeryan22


    defenderdude wrote: »
    You will find the switch contacts tend to burn out quickly with the g&g sa80. Its a common issue among others with both models. Expect to replace them as a matter of course. A fix might be to install a MOSFET into it - should prolong the life of the contacts.

    Yeah sure that's what currently goin on, sound, any suggestions into which type of MOSFET or just any..?


Advertisement