FS: Dura-Ace 7900 Crank - 105 Crank - Ritchey Carbon Bars/Stem

jdt101

Dura-Ace 7900 Crank 53/39 172.5mm with Ultegra 6700 BSA BB.
Slight wear on cranks from shoe rub.
€220





Shimano 105 5700 Crank Compact 52/36 (no BB)
Stronglight 52 outer ring, 36 Sram inner ring.
€90





Ritchey Pro Carbon Matrix Bars 42cm and Pro Carbon Matrix Stem 110mm
€50 - Bars €30 - Stem(small mark on faceplate from cable rub) SOLD

noc231073

jdt101 wrote: »

Dura-Ace 7900 Crank 53/39 172.5mm with Ultegra 6700 BSA BB.
Slight wear on cranks from shoe rub.
€220





Shimano 105 5700 Crank Compact 52/36 (no BB)
Stronglight 52 outer ring, 36 Sram inner ring.
€90





Ritchey Pro Carbon Matrix Bars 42cm and Pro Carbon Matrix Stem 110mm
€50 - Bars €30 - Stem(small mark on faceplate from cable rub)

Would you take €70 for the bars and stem?? Where are you based

johnalz

Hi sent pm

jdt101

@noc231073
I'm in Cork, can post. Thank you for the offer but I think they are priced to sell at asking.

jdt101

Just another photo of non drive side on 7900. (should get my leg straightened!)

High Rouleur

Offer asking for bar and stem

jdt101

High Rouleur wrote: »

Offer asking for bar and stem

as per rules. offer accepted. PM sent.

noc231073

Nice .... I did wait 7 hours for a reply ......

jdt101

@Mods

Can you please clarify the rules to noc231073.

The tone of the message is also uncalled for and is my first encounter of same on this forum. This is an excellent free marketplace.

noc231073

The rules are the rules , but it doesn't mean I have to agree with them ...
It's just would have been nice to make counter offer ... When my question was answered .
As it a bit pointless to offer asking if you are the other side of the country and won't post...
Maybe I should just offer asking first and then sort the finer details ... And then withdraw from the sale ... If it doesn't suit me ... Thus wasting everybody's time .....

CramCycle

noc231073 wrote: »

Nice .... I did wait 7 hours for a reply ......

and? this is a forum where you access in your free time, in some cases you may not get a response for a day or two, if at all

jdt101 wrote: »

@Mods

Can you please clarify the rules to noc231073.

The tone of the message is also uncalled for and is my first encounter of same on this forum. This is an excellent free marketplace.

CLARIFIED: It is incredibly inappropriate

noc231073 wrote: »

The rules are the rules , but it doesn't mean I have to agree with them ...
It's just would have been nice to make counter offer ... When my question was answered .
As it a bit pointless to offer asking if you are the other side of the country and won't post...
Maybe I should just offer asking first and then sort the finer details ... And then withdraw from the sale ... If it doesn't suit me ... Thus wasting everybody's time .....

A counter offer is at the discretion of the seller, if they don't want to make one, that is their choice. The OP clarified they were priced to sell.

Captain Havoc

johnalz wrote: »

Hi sent pm

No off thread dealing permitted, as for every forum on boards, you must read the forum charter before posting.

jdt101

Captain Havoc wrote: »

No off thread dealing permitted, as for every forum on boards, you must read the forum charter before posting.

No off thread dealing. It was a question about the 7900 crank for which I posted an additional photo here.

TheBlaaMan

JD
What is the wear and tear/usage on the 105 crankset & rings?

jdt101

TheBlaaMan wrote: »

JD
What is the wear and tear/usage on the 105 crankset & rings?

Hi Blaa

They were used this winter only so about 1500km. There is a scratch on the drive side as shown in pic. This happened while not fitted!

TheBlaaMan

Thanks for the prompt reply. Can you confirm if this is the FC-5700 (with a 130mm BCD) - which would assume it has to be in order to take 52/36 - or the FC-5750 (110mm) ??

It looks to be stamped "110".........hence my confusion. I'm wondering if you been able to source & fit larger 'rings to a 5750?

I already have a FC-5750.

Reference : http://bike.shimano.com/media/techdocs/content/cycle/SI/105/SI_1M30A/SI-1M30A-003-ENG_v1_m56577569830702207.pdf


Thanks

jdt101

yes, sorry technically a 5750 110mm. (you bought the 50/34 rings!)

this is the 52 - http://www.bike24.com/1.php?content=8;navigation=1;product=4615;page=1;menu=1000,4,122;mid=8;pgc=122:435

TheBlaaMan

jdt101 wrote: »

yes, sorry technically a 5750 110mm. (you bought the 50/34 rings!)

this is the 52 - http://www.bike24.com/1.php?content=8;navigation=1;product=4615;page=1;menu=1000,4,122;mid=8;pgc=122:435

OK, thanks for the clarification. As I already have the compact, all I really need is the rings, and TBH, I thought I needed to get a new crank to avail of 52/36 or above......so I'm grateful for the pointer. I'm probably out of the runnning for this, but I may get back to you if you dont have another offer on it/

Cheers

jdt101

Price Adjustment/Improvement:):

Dura-Ace 7900 Crank €200

105 Crank €75

TheBlaaMan

JDT

How about €70 for the 105 crank and I'll arrange collection?

jdt101

TheBlaaMan wrote: »

JDT

How about €70 for the 105 crank and I'll arrange collection?

Yes offer accepted. PM me too arrange collection.

TheBlaaMan

Will do,. Thanks

Bianchi00

Hello . What sort mileage on Dura ace cranks

jdt101

Bianchi00 wrote: »

Hello . What sort mileage on Dura ace cranks

Wouldn't be sure of exact mileage, but they have been on my good bike for around 18 months. (Guess in the region of 4k km.)

johnalz

i could give you €200 for the crank and the 110m stem plus an extra €10 for postage so total €210 for stem and crank including postage, can you let me know today

jdt101

johnalz wrote: »

i could give you €200 for the crank and the 110m stem plus an extra €10 for postage so total €210 for stem and crank including postage, can you let me know today

The Stem is sold.

johnalz

jdt101 wrote: »

The Stem is sold.

€190 inclu post for the durace crankset?

jdt101

johnalz wrote: »

€190 inclu post for the durace crankset?

€200 incl postage.

johnalz

Let me think about it thanks

TheBlaaMan

105 crank collected. Many thanks JDT.

jdt101

Dura Ace crank still available, €185 delivered.

WilkBMC

Offering €170 for the Dura ace crank delivered.

jdt101

WilkBMC wrote: »

Offering €170 for the Dura ace crank delivered.

Offer accepted. PM Sent.

WilkBMC

Dura ace crank delivered nice dealing with you jdt101