*Rare* KA Free Float Heavy Barrel Sniper Front end set

walks86

Hi Guys,

So my DMR has been turned into a 7" CQB so have the front end of my KA Free Float Heavy Barrel Sniper for Sale.

Is in very good condition with minimal marking. Is a Black free float barrel system with railed gas block and solid 2 piece aluminium barrel (secures inside the gas block). A rail has also been mounted to allow mounting of Grips etc. Comes with High quality swiss arms collapsible bipod.

Also have the Tasco 3-9x40 adjustable scope with illuminated reticule (red and green) and removable sun shield (also works brilliantly at protecting the lense from BBs and preventing reflections giving away your position.

Also have Madbull ultimate Hop unit (flanges filed down to fit in most m4 upper receivers, common for this hop unit) and ultimate 509mm 6.03 tight bore barrel, both have not seen very much use and are in very good condition.

Pictures:
http://i5.photobucket.com/albums/y199/D4_St3/KAfrontendpieces_zpsae2439d1.jpg

http://i5.photobucket.com/albums/y199/D4_St3/KAfrontend2_zps353a3ca3.jpg

http://i5.photobucket.com/albums/y199/D4_St3/KAfrontend3_zps5f617498.jpg

http://i5.photobucket.com/albums/y199/D4_St3/KAFrontend1_zpsf012068d.jpg

Usual terms and conditions:

cash or paypal, buyer pays fees
Based in Carrickmines/ south dublin area

Prices:

Front end set (Barrel parts, gas block, outer shroud and bipod) €125
Scope €50
Madbull Ultimate Hop unit €25
Ultimate tight bore barrel €25 (€40 for the pair)

Will do the whole package for €200

SOCOM

Hi mate,
What length is the outer barrel and handguard?

einheit51

Can I ask if this kit will fit on any M4/M16 receiver
Does the hand grip and fit the shroud as standard or did you have to modify.
Is it a standard Swiis arm Bipod.
Is the outer barrel capable of taking a different flash hider/front end.

Thanks,

walks86

SOCOM wrote: »

Hi mate,
What length is the outer barrel and handguard?

Hi Socom,

The full barrel length is 490cm (not including the part that fits into the reciever) and the hand guard is 310cm

einheit51 wrote:

Can I ask if this kit will fit on any M4/M16 receiver
Does the hand grip and fit the shroud as standard or did you have to modify.
Is it a standard Swiis arm Bipod.
Is the outer barrel capable of taking a different flash hider/front end.

Thanks,

Hi Einheit,

It should fit most M4/M16 recievers. Hand grip rail was added after but only required two small holes to be drilled (very cleanly) and if you dont want the rail just remove the screws and you will not even notice the two small holes on the underside. Do swiss arms have a standard? if so yes probably, It was bought at hobbyairsoft. I do not think that the outer barrel can take a different flash hider/front end as it secures to the main length inside the gass block.

walks86

bump

doblobus

Interested in the inner barrel and hop . . ill offer 30 as im on a tight budget at the moment

walks86

doblobus wrote: »

Interested in the inner barrel and hop . . ill offer 30 as im on a tight budget at the moment

Hi Doblobus,

Sorry but that is too low, already taking 10 off the price selling the pair together

doblobus

Can you make it into city centre ?

walks86

doblobus wrote: »

Can you make it into city centre ?

not really, I work at liffey valley and live in carrickmines so can meet along the m50 between those.....or play in red barn, can meet there?

doblobus

I don't think its going to work. Thanks anyway!

brugmand

Would you trade for a bravo rdw kac assault rifle

walks86

brugmand wrote: »

Would you trade for a bravo rdw kac assault rifle

details?

brugmand

Hi its fully steel with new gearbox engine and battery comes with three magz speedloder sling and spares:)

brugmand

Any interest

walks86

brugmand wrote: »

Any interest

Hi, thank you for the offer but to be honest I have enough AEGs at the moment and don't want to add another one....the only trades I would really be interested in are good condition Tokyo Marui Pistols or a Classic Army advanced carbine MOD Stock.

walks86

bump

F U B A R

Hi Walks86, offer €70 for just the front end set.

walks86

F U B A R wrote: »

Hi Walks86, offer €70 for just the front end set.

too low mate, lowest I would go is 90 collected

walks86

bump

walks86

bump

walks86

Price drop:

Front end set (Barrel parts, gas block, outer shroud and bipod) €100
Scope €45
Madbull Ultimate Hop unit €20
Tight bore barrel gone

einheit51

walks86 wrote: »

Price drop:

Front end set (Barrel parts, gas block, outer shroud and bipod) €100
Scope €45
Madbull Ultimate Hop unit €20
Tight bore barrel gone

Hi Walks86,
I can offer 120 euro for a very quick sale if you like.
Thanks

walks86

einheit51 wrote: »

Hi Walks86,
I can offer 120 euro for a very quick sale if you like.
Thanks

could do 100 for the front end set and the hop unit if that worked for you?

F U B A R

Hi walks86. Offer €80 collected for Front end set (Barrel parts, gas block, outer shroud and bipod).

walks86

F U B A R wrote: »

Hi walks86. Offer €80 collected for Front end set (Barrel parts, gas block, outer shroud and bipod).

Ok, go on then! to Pm's