Vltor body and LaRue 12" RIS project + more

hitman42

Alright basically this started as me wanting a face lift for my G&G m4, so i got the vltor upper and lower and the larue rail for my G&G drop in nicely, till 2 off the 4 wire's it has (MOSFET fitted) got caught and broke. I am not a big gearbox person so i am not going to open it to re-wire it. And i want to get out of m4's as i am mainly snipe and DMR most of the time now anyway.

So basically it needs re-wiring and a flash hider and its good to go,

Come's with:

Vltor upper/lower
12" LaRue RIS
Think its a G&P otter barrel
G&G Gearbox's with MOSFET and deans plug
Ultimate Hop unit with a Madbull hop-up rubber (think it was)
Stainless steel 6.03 TBB
Clone MBUS sight in OD
PTS ASAP sling mount
And the stock
There are a few bits that are missing in the photo's but they are all there just didnt get to put them on yet
And 5 mid-caps

It was shooting a 300 fps before its transplant


What i am looking for is a G&G SOC 16 or a CA M14 SOCOM

Any Questions please do ask

hitman42

More photo's

DJDylan106

Just a few questions if you don't mind. Are you willing to sell instead of trade?if so, would you be looking to sell the whole lot as a package or would you split? And What would the asking price be please? , thanks, Dylan.

hitman42

DJDylan106 wrote: »

Just a few questions if you don't mind. Are you willing to sell instead of trade?if so, would you be looking to sell the whole lot as a package or would you split? And What would the asking price be please? , thanks, Dylan.

Well if I can't find a trade I will sell it I may split it as a package I would be looking at round €250 ish

DJDylan106

hitman42 wrote: »

Well if I can't find a trade I will sell it I may split it as a package I would be looking at round €250 ish

Okay thank you for reply, bit out of my price range, best of luck, hope you find what you're looking for, thanks again

hitman42

DJDylan106 wrote: »

Okay thank you for reply, bit out of my price range, best of luck, hope you find what you're looking for, thanks again

No worries lad

hitman42

Bump

hitman42

Bump

eirekielthy

hitman42 wrote: »

Alright basically this started as me wanting a face lift for my G&G m4, so i got the vltor upper and lower and the larue rail for my G&G drop in nicely, till 2 off the 4 wire's it has (MOSFET fitted) got caught and broke. I am not a big gearbox person so i am not going to open it to re-wire it. And i want to get out of m4's as i am mainly snipe and DMR most of the time now anyway.

So basically it needs re-wiring and a flash hider and its good to go,

Come's with:

Vltor upper/lower
12" LaRue RIS
Think its a G&P otter barrel
G&G Gearbox's with MOSFET and deans plug
Ultimate Hop unit with a Madbull hop-up rubber (think it was)
Stainless steel 6.03 TBB
Clone MBUS sight in OD
PTS ASAP sling mount
And the stock
There are a few bits that are missing in the photo's but they are all there just didnt get to put them on yet
And 5 mid-caps

It was shooting a 300 fps before its transplant


What i am looking for is a G&G SOC 16 or a CA M14 SOCOM

Any Questions please do ask

I'd swap ya a tmp for the m4

hitman42

eirekielthy wrote: »

I'd swap ya a tmp for the m4

How many mags do u have for it and are the leak free? And to be honest I am really only after a socom m14

eirekielthy

hitman42 wrote: »

How many mags do u have for it and are the leak free? And to be honest I am really only after a socom m14

One leak free mag

hitman42

eirekielthy wrote: »

One leak free mag

thanks for the offer but gonna hold on a see if i can find a trade otherwise gonna sell a parts

tomaswatkins

hitman42 wrote: »

thanks for the offer but gonna hold on a see if i can find a trade otherwise gonna sell a parts

Hi how much for the vltor reciever? Also what make is it?

hitman42

gonna withdraw this for the time being MOD's can mark this as withdrawn please

DJDylan106

If on the offchance you decide to sell separately in the future, I could offer 50 for the RIS. Have a merry christmas,

Regards,
DJDylan106

hitman42

DJDylan106 wrote: »

If on the offchance you decide to sell separately in the future, I could offer 50 for the RIS. Have a merry christmas,

Regards,
DJDylan106

u want the rail still?

hitman42

tomaswatkins wrote: »

Hi how much for the vltor reciever? Also what make is it?

hi man 50 would take it for the upper and lower it has a great finish to it

tomaswatkins

hitman42 wrote: »

hi man 50 would take it for the upper and lower it has a great finish to it

Thanks gor reply mate. Would you sell the upper seperate? I have a noveske lower it would work nuce with

DJDylan106

hitman42 wrote: »

u want the rail still?

I do indeed any chance would you include the inner barrel for 50 if not how much extra, thank you very much for reply kindest regards, Dylan.

hitman42

tomaswatkins wrote: »

Thanks gor reply mate. Would you sell the upper seperate? I have a noveske lower it would work nuce with

would prefer to sell it as a set But....

hitman42

DJDylan106 wrote: »

I do indeed any chance would you include the inner barrel for 50 if not how much extra, thank you very much for reply kindest regards, Dylan.

i am gonna hang on to the inner barrel but would add the outer barrel

DJDylan106

hitman42 wrote: »

i am gonna hang on to the inner barrel but would add the outer barrel

Hmm tempting, so RIS and outer barrell for 50 sound ok?

hitman42

DJDylan106 wrote: »

Hmm tempting, so RIS and outer barrell for 50 sound ok?

yep 50 for both

DJDylan106

hitman42 wrote: »

yep 50 for both

It's a deal then. To the pm's

hitman42

DJDylan106 wrote: »

It's a deal then. To the pm's

to pm's then

tomaswatkins

hitman42 wrote: »

would prefer to sell it as a set But....

go on name your price on the upper also what make is it?

hitman42

tomaswatkins wrote: »

go on name your price on the upper also what make is it?

30 for the upper seeing the finish is great on it, the make i am not sure as i got it off 1 of the lads from the club i know its a g&p clone

tomaswatkins

hitman42 wrote: »

30 for the upper seeing the finish is great on it, the make i am not sure as i got it off 1 of the lads from the club i know its a g&p clone

Ok il pass mate as only after a king arms thanks for your time and glws

hitman42

tomaswatkins wrote: »

Ok il pass mate as only after a king arms thanks for your time and glws

no worries man

(just a note the upper and lower are anodized and have a great matte finish)

hitman42

RIS Sold

dinnybyrne

Would you fit a battery in that there stock and if so how much?

hitman42

dinnybyrne wrote: »

Would you fit a battery in that there stock and if so how much?

you may get a stock tude lipo in with some moding to allow for the wire's to get in, but i would not say its worth cutting a good stock apart

dinnybyrne

hitman42 wrote: »

you may get a stock tude lipo in with some moding to allow for the wire's to get in, but i would not say its worth cutting a good stock apart

Cheers, how much for the flash hider?

hitman42

dinnybyrne wrote: »

Cheers, how much for the flash hider?

10 man

dinnybyrne

hitman42 wrote: »

10 man

10 posted? If so we have a deal

hitman42

dinnybyrne wrote: »

10 posted? If so we have a deal

not a 100% sure but i think its threaded clockwise just before you make any offers lol

dinnybyrne

hitman42 wrote: »

not a 100% sure but i think its threaded clockwise just before you make any offers lol

That would be a problem alright fair play, can you check when you get the chance?

brugmand

If it is still for sale i would trade a fully steel bravo rdw kac

hitman42

brugmand wrote: »

If it is still for sale i would trade a fully steel bravo rdw kac

70% off this is sold so no trades possible

tyrone03

Hi wat cap are the midcaps? Metal or plastic? And how much?

ramboo

hi, how much for the stock? thanks

hitman42

ramboo wrote: »

hi, how much for the stock? thanks

Sorry man only saw your post there €45 would take it

tyrone03

Ya must have missed mine then its the one above, wat cap are mags? Metal or plastic?

hitman42

tyrone03 wrote: »

Ya must have missed mine then its the one above, wat cap are mags? Metal or plastic?

Sorry man they are 80 round E-mags green label and 1 120 round think mag brand with trades on it

S.E.A.L.s

Do you have a pic of the mags and an asking price for them please?

hitman42

SEALs_Ireland wrote: »

Do you have a pic of the mags and an asking price for them please?

will try to get some up in a bit

walks86

hitman42 wrote: »

hi man 50 would take it for the upper and lower it has a great finish to it

hey mate,

still have the full receiver? offer 50...or 70 if you want to off load the broken gearbox too?

hitman42

walks86 wrote: »

hey mate,

still have the full receiver? offer 50...or 70 if you want to off load the broken gearbox too?

the receiver is gone, but still have the gear box

walks86

hitman42 wrote: »

the receiver is gone, but still have the gear box

Top and bottom? thats a shame! ok how much do you want for the gearbox?

hitman42

walks86 wrote: »

Top and bottom? thats a shame! ok how much do you want for the gearbox?

could do it for 25 without the mosfet

walks86

hitman42 wrote: »

could do it for 25 without the mosfet

is there anything else missing other than the mosfet? and does it come with a motor?