2 tvs from 1 dish

limerick79

hi guys....help please....

i have free to air satelite via sky box....

my problem is 1 want to run the cable to my bedroom...
picked up a splitter kit from arogos....

all wires routed and connected proper...

when i put the original cable to the box i have a satelite signal...
but when i attached the splitter and connections i got nothing...

any advice tips please....

MrFrisp

As far as I know,,you cannot split a Satellite signal.

You will need an extra feed from the LNB.

Or you could run a cable via the RF Out on the Sky box..But you would have to watch what is on the sky box in the other room.






.

steveon

As already stated you cannot split a satellite signal, you will need a quad lnb put on your dish and a cable ran directly from the dish to the box in the second room.

Or if you wish to view the same channel in both rooms you can run a cable from the back of the sky box from the connection marked rf2 to the secondary room and control it via a magic eye

zg3409

In the second room do you have a satellite receiver?

Best to connect RF1 from Sky box to aerial in on 2nd TV. On the 2nd TV (while the sky box is on) do a scan for channels. You should find one which is the Sky channel