Ferguson Ariva 250

Avns1s

downwiththatsor wrote: »

Just realised its a 252, will have to do my own scan and use the channel editor.
Cheers

You're lucky it didn't come up with the ASH symbol and need reflashing!

downwiththatsor

Avns1s wrote: »

You're lucky it didn't come up with the ASH symbol and need reflashing!

Yeah but i have experience of recovering anyway so was not too worried.
Cheers

Kurn

With the latest firmware I have noticed, on all satellite channels you get "no information" on the pop up epg info which before loaded information after a few seconds, unless you press the info button twice, anyone notice this, is there a fix does anyone know, if you go into the guide it will show the information but not on the popup menu.

Nowso

try rebooting your box

Kurn

Nowso wrote: »

try rebooting your box

Yes that does work, but after a few hours it goes back to "no information". Better than nothing. Thanks

Avns1s

Kurn wrote: »

Yes that does work, but after a few hours it goes back to "no information". Better than nothing. Thanks

Maybe step back to the previous firmware version if this wasn't an issue for you before. As mentioned, the reboot should sort it for a long period. My 250 never does this but I have noticed it on another Ariva box but a reboot sorts it for weeks on end.

Nowso

changing satellites or connections can cause it to need to be done . check your connections aswell might help

frostypants

I've two Ariva 250 boxes and I've noticed CBS Action is now gone in both. Any suggestions please why this is so? Thanks

Avns1s

frostypants wrote: »

I've two Ariva 250 boxes and I've noticed CBS Action is now gone in both. Any suggestions please why this is so? Thanks

Changed Transponder on 8th April seemingly to 11389 H 27500.

Llamedos

You need to rescan for some channels as the moved , horror +1, Heat and CBS
Sky UK
DVB-S 27500-2/3
2-2113
4.4
R Eckendorff
150402

.
Horror Channel UK +1
53700 2305 2306 E
new
Jewellery Maker
53705 2314 2315 E
new
CBS Action UK
53710 2311 2312 E
new
Heat TV
53715 2316 2317 E
new
Magic TV (UK)
53720 2320 2321 E
new
Bonanza Bonanza
53730 2308 2309 E
new

frostypants

I did a rescan yesterday evening but it actually did nothing. Still a blank screen. Can I add it in manually on the ariva?

Tony

Do a transponder (TP) scan using the info above , lyngsat.com is showing 11389 H

frostypants wrote: »

I did a rescan yesterday evening but it actually did nothing. Still a blank screen. Can I add it in manually on the ariva?

Avns1s

frostypants wrote: »

I did a rescan yesterday evening but it actually did nothing. Still a blank screen. Can I add it in manually on the ariva?

Yes, Menu> Installation > TP List> then add the new TP using the settings in my earlier post. Do a scan on this TP and the channels should be added to your "All channels" list.

frostypants

Thanks guy. Will do this this evening. Appreciate the help

Nowso

doing a blind scan usually finds everything

ballintog

My sister has an Ariva 250 (based on my recommendation 2 years ago...)

I do not live at home so I am doing this remotely...

We upgraded to the newest 1.27B3 patched firmware. The aerial is pointed at Clermont Carn.

We now get HD RTE but only SD UK channels. Any ideas?

Thanks
James

Tony

Try a satellite search selecting FTA only , you may have to select astra 2 and eurobird in the satellite list, press ok and you should see a "heart" symbol next to the satellite . Sounds like you may be receiving only terrestrial channels .

ballintog wrote: »

My sister has an Ariva 250 (based on my recommendation 2 years ago...)

I do not live at home so I am doing this remotely...

We upgraded to the newest 1.27B3 patched firmware. The aerial is pointed at Clermont Carn.

We now get HD RTE but only SD UK channels. Any ideas?

Thanks
James

ballintog

Yes I am only on terrestrial. The dish is no more. Are the UK channels from Clermont Carn only SD? If so can I pickup HD UK channels from the Divis transmitter?

Nowso

ballintog wrote: »

Yes I am only on terrestrial. The dish is no more. Are the UK channels from Clermont Carn only SD? If so can I pickup HD UK channels from the Divis transmitter?

English freeview hd channels are not available on the 250 you needs a dvb t2 box to get them ie the 252

they are some that are not available in every area either

u must be already picking up the Divis as Claremont only has saorview it does have utv ireland

Tony

I'd try and get your dish back up and running unless you want to invest in a newer combo with T2 tuner and assuming that Freeview HD is available to you .

foxyboy

Can anyone tell me whats in the new firmware ?

I have a fully working 1.26B9 and unless theres good reason i will leave well alone.

Nowso

leave it for now if its working

Thurston?

ballintog wrote: »

... Are the UK channels from Clermont Carn only SD? If so can I pickup HD UK channels from the Divis transmitter?

Clermont Carn doesn't transmit UK services. If you're on/near the east coast, with a single vertically polarised aerial pointed at Clermont Carn, your UK stuff is more than likely coming from Kilkeel.

Kilkeel isn't a full-service Freeview transmitter but, all Freeview sites carry BBC1, BBC2, BBC3, CBBC, ITV (or UTV/STV), & Channel 4 HD. As mentioned already, you need a DVB-T2 capable receiver, & also hope that signal conditions in your area can provide a reliable service: satellite is a surer bet in this latter respect.

Nowso

ive noticed i am getting upto 5 days epg on channels on 13 east hotbird tonight interesting using the patch version

glineli

Nowso wrote: »

ive noticed i am getting upto 5 days epg on channels on 13 east hotbird tonight interesting using the patch version

Is that 1.26b9?

Nowso

glineli wrote: »

Is that 1.26b9?

its 1.273b it may be same on 1.269

i was on the Canal + Polish channels and hit info 3 times and days of epg appeared .
you get a list and hit right to go to next day


must try it with 28.2 in a bit - worth a look i had no usb connected to the box

glineli

Nowso wrote: »

its 1.273b it may be same on 1.269

i was on the Canal + Polish channels and hit info 3 times and days of epg appeared .
you get a list and hit right to go to next day


must try it with 28.2 in a bit - worth a look i had no usb connected to the box

Any luck on 28.2?

winston_1

The EPG on Hotbird channels is the standard 7 day EPG used mainly in Germany and supported by generic satellite receivers. The 2 EPGs on 28˚E are bespoke to sky and Freesat and only work with the appropriate receivers, though some have hacked the Freesat EPG.

johnnyb6

I have the 250 box set up in attic and I use it from time to time when I am forced to attic to see match. I wanted to record from RTE 2 today but all the irish channels are scrambled. I rescanned all the stations again but still cant get the stations. Would appreciate any help.


Thanking you

Avns1s

johnnyb6 wrote: »

I have the 250 box set up in attic and I use it from time to time when I am forced to attic to see match. I wanted to record from RTE 2 today but all the irish channels are scrambled. I rescanned all the stations again but still cant get the stations. Would appreciate any help.


Thanking you

Have you got your aerial plugged in to the box, as opposed to the cable from the LNB?

Did you scan on the terrestrial scan as opposed to the satellite scan.

The RTE channels are not available on satellite without a sky sub or a saorsat setup.

johnnyb6

Avns1s wrote: »

Have you got your aerial plugged in to the box, as opposed to the cable from the LNB?

Did you scan on the terrestrial scan as opposed to the satellite scan.

The RTE channels are not available on satellite without a sky sub or a saorsat setup.

I did a terrestrial scan and no channels found came up. I will replace the aerial lead and try again







Thanks very much

andycahill

has anyone got the latest patch firmware for the ariva 150 ?

Nowso

andycahill wrote: »

has anyone got the latest patch firmware for the ariva 150 ?

i see theres another new 1.2.75 update

when i get it ill add it to my dropbox

it has not been released yet - just checked


https://www.dropbox.com/sh/necwijtkwzmaexi/AADorOkhhaqNRssJaMDji_YYa?dl=0

andycahill

Nowso wrote: »

https://www.dropbox.com/sh/necwijtkwzmaexi/AADorOkhhaqNRssJaMDji_YYa?dl=0

thanks a million

Tony

Might be best to post in the 150 Thread , this is the 250.

andycahill wrote: »

has anyone got the latest patch firmware for the ariva 150 ?

dodzy

Hi folks,

have been out of the loop for way too long. Used to be reasonably proficient with this box but it has sat there under the TV for many months getting the usual dust down but remains in standby, dormant.

Got a call to the fathers house last night. All channels gone. Dont know WTF he managed to do but nothing on Astra 2A at all. I had initially set up my box and just transferred a backup to his at the same time with all the categorized fav section done to my liking. Anyway, 9.30 last night and I could not have been arsed to set up again in his place so just blind scanned and got him up again with the usual 7 channel 4s and about 10 ITVs and all the other multiples. So, my question.

The box is on FW ver:1.18. Can I just pop on the FW 1.27 that was uploaded to dropbox ( linked in earlier April 2015 post ) with the channel categories ?

Avns1s

dodzy wrote: »

The box is on FW ver:1.18. Can I just pop on the FW 1.27 that was uploaded to dropbox ( linked in earlier April 2015 post ) with the channel categories ?

That should work just fine.

You always have a risk when upgrading firmware but in all probability you'll be sound.

Nowso

a lot of them channels will have changed by now

dodzy

Nowso wrote: »

a lot of them channels will have changed by now

Yeah nowso, you're spot on, if I had a penny for every time I went to the old mans house and was asked "why is me golf channel gone?" And then have to re-scan a TP, if be a wealthy man. But for the best part, they've been thrilled with the setup and it's pretty bulletproof.

b318isp

1.27B3 patch

In a moment of madness, I updated my 250 when I had no issues. I just wanted to leave feedback on it for others:

- I have a powered HDD, after the update, a partition error would come up around 50% of the time making the HDD unusable.
- A fast boot was introduced, the 250 starting in around 1 second
- The standby function on both the remote and on the front facia would not work around 50% of the time, a hard turn off being required to reset
- The EPG would populate, but the OSD now & next would be blank for maybe 40% of channels, and this would get worse the longer the box was left on...
- Often the EPG reference would freeze - in other words, the 250 time would lag the actual time. It could be 21:00 but the box would think it is 19:30.

So, thanks to Boardsies, I updated to 1.27B5 - which, so far, seems to be fine.

Avoid 1.27B3!

gabbo is coming

handofdog wrote: »

If you have your box connected to a network that supports wifi then the "Ariva STBRemote" app is very good - it allows you to control your STB box using your phone. Your phone connects to the wifi and then your STB box should appear in the list of controlable devices.

I have only used the Android version and I'm very happy with it - I can't comment on the iPhone version but it would be worth a go.

One of the best things about the app is that it uses network connectivity to control the box - i.e. it doesn't need "line of sight".

That said, I've never had any trouble with the remote that came with our box.

Hi

Can't get this to work

Ariva 152 plugged in to network, V1.27B9

Has all the right ip settings

When I "scan" on iPhone app, nothing

Android app says "no server"

Any ideas?

b318isp

gabbo is coming wrote: »

Any ideas?

Is it a 5G system by any chance? It doesn't work on mine, I have to be on 2.4G.

gabbo is coming

b318isp wrote: »

Is it a 5G system by any chance? It doesn't work on mine, I have to be on 2.4G.

I got it to work. I upgraded to latest version of firmware (don't know if that did the trick).

Box must be on, app must be started after the box is switched on, then it finds it.

Nowso

new 1.2.7b6 out yesterday

patch version be available soon aswell

Nowso

1.27.b6 patch for 150/152/250/252

https://www.dropbox.com/sh/necwijtkwzmaexi/AADorOkhhaqNRssJaMDji_YYa?dl=0

Nowso

youtube api is the major upgrade

Ph3arTh35k1llz

Sooooo I had an upgrade go bad.
I have USB to serial and a Null modem cable keep getting set stb memory error so am guessing its to do with the USB to serial converter.

Does Anyone know the procedure to restore a good STB to an ASH STB?

Thanks in advance.

Tony

Power up the good box until you have a picture ( do not power down until complete) . Connect a null modem cable to bad box (usb to serial will not work for this ) and power up the bad box using the power switch on the back . You should see front panel display change on both boxes

Ph3arTh35k1llz wrote: »

Sooooo I had an upgrade go bad.
I have USB to serial and a Null modem cable keep getting set stb memory error so am guessing its to do with the USB to serial converter.

Does Anyone know the procedure to restore a good STB to an ASH STB?

Thanks in advance.

Ph3arTh35k1llz

Thanks a million Tony,
Worked like a charm!

These boxes sure are very versatile and robust!

Tony

My pleasure, glad you got sorted out.

Ph3arTh35k1llz wrote: »

Thanks a million Tony,
Worked like a charm!

These boxes sure are very versatile and robust!