Canyon fork, Look carbon pedals, Ritchie handle bars, mavic aksium wheel

dooverylittle

Canyon Carbon fork - one one four sl- New, never installed on a bike.
Price 220 Euro. (Cost 365 a couple of years ago, not sure how to value it, so make a offer)

Mavic aksium rear wheel shimano hub(latest model less then 100km/perfect condition)
Price 100 Euro.
http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idcategory=89&idproduct=53169

Look Quartz carbon Pedal (MTB/Cyclocross). Excelent condition used on 4 rides max.
http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=23377al.
Price 65 Euro.

Ritchie WCS Logic road handle bars. 40cm used.
30 euro.

slipstream

hiya,

i'll take the aksium if its in pwo and i can get it this week.

are you in dublin?

colm

dooverylittle

Hi Colm, I am in knocklyon is that handy for you.

slipstream

hiya,

i live in raheny, work in blanchardstown.

would you be able to make it near either of those at any stage during the week?

colm

dooverylittle

Blanch would probably be easier. wednesday lunch time?

slipstream

> wednesday lunch time?

sounds good to me.

i'll pm you my mobile.

colm

DonVincenzo

Offer €30 for the pedals

dooverylittle

DonVincenzo wrote: »

Offer €30 for the pedals

Hey Don, I was hoping for more, Keep an eye on the thread, If I dont get any other offers I might let them go.
They are in perfect condition.

dooverylittle

Aksium wheel sold.

dooverylittle

dooverylittle wrote: »

Canyon Carbon fork - one one four sl- New, never installed on a bike.
Price drop 220 140 Euro. (Cost 365 a couple of years ago, not sure how to value it, so make a offer)



Mavic aksium rear wheel shimano hub(latest model less then 100km/perfect
condition)


Price 100 Euro. Sold.


http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idcategory=89&idproduct=53169


Look Quartz carbon Pedal (MTB/Cyclocross). Excelent condition used on 4 rides max.
http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=23377al.
Price 65 Euro. price drop 45 Euro

Ritchie WCS Logic road handle bars. 40cm used.
30 euro.Price drop 20 Euro

Price drops. Offers welcomed!

zzzzzzzz

dooverylittle wrote: »

dooverylittle wrote: »

Canyon Carbon fork - one one four sl- New, never installed on a bike.
Price drop 220 140 Euro. (Cost 365 a couple of years ago, not sure how to value it, so make a offer)



Mavic aksium rear wheel shimano hub(latest model less then 100km/perfect
condition)


Price 100 Euro. Sold.


http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idcategory=89&idproduct=53169


Look Quartz carbon Pedal (MTB/Cyclocross). Excelent condition used on 4 rides max.
http://www.cyclesuperstore.ie/shop/pc/viewPrd.asp?idproduct=23377al.
Price 65 Euro. price drop 45 Euro

Ritchie WCS Logic road handle bars. 40cm used.
30 euro.Price drop 20 Euro

Price drops. Offers welcomed!

Offer 100 for the canyon fork.

dooverylittle

aidan.offbeat wrote: »

Offer 100 for the canyon fork.

Ouch that hurts, It cost 365, and it is still in the box.
But I guess it is worth what someone will pay for it.
Let me mull over it for a day.

markie379

dooverylittle wrote: »

Ouch that hurts, It cost 365, and it is still in the box.
But I guess it is worth what someone will pay for it.
Let me mull over it for a day.

Very Old Post I know but just checking if you sold the fork???
If not ill offer asking.

dooverylittle

markie379 wrote: »

Very Old Post I know but just checking if you sold the fork???
If not ill offer asking.

The Fork in the add is gone.
I have another Canyon fork exact same model but it is used and has been cut to size so I don't know if it will fit your bike.
It came off a 54cm frame.
The frame was broken and couldn't be repaired.
The "rivets" that hold the bottle cage in place came away from the frame, canyon said it was over tightened and not repairable.
I sold off all the components but I still have the fork.
If your interested pm me your number.
I would let it go for 70, any lower then that I would just hang on to it as I bought another Canyon.
Let me know if your interested.

randomstuff

dooverylittle wrote: »

The Fork in the add is gone.
I have another Canyon fork exact same model but it is used and has been cut to size so I don't know if it will fit your bike.
It came off a 54cm frame.
The frame was broken and couldn't be repaired.
The "rivets" that hold the bottle cage in place came away from the frame, canyon said it was over tightened and not repairable.
I sold off all the components but I still have the fork.
If your interested pm me your number.
I would let it go for 70, any lower then that I would just hang on to it as I bought another Canyon.
Let me know if your interested.

Is that a full carbon fork? Any dings/dents/scratches? Could you post a picture? What does it weigh? And, length of steerer, please.

dooverylittle

randomstuff wrote: »

Is that a full carbon fork? Any dings/dents/scratches? Could you post a picture? What does it weigh? And, length of steerer, please.

Yes, it is full carbon, the same as the one previously for sale.
Canyon One One four SL.

I will measure the steerer and try and get a pic up for you.
you know its a 1 1/4 inch?

I think it is 300g.

macnab

Have you still got the damaged Canyon frame? I am looking for a medium frame to build up as a dedicated turbo bike.

dooverylittle

macnab wrote: »

Have you still got the damaged Canyon frame? I am looking for a medium frame to build up as a dedicated turbo bike.

No I don't have it. I sent it back to canyon to be assessed(I took the fork off before sending it back).
I Didn't bother get the frame sent back to me, it would have been perfect for a turbo bike.
I was tempted to just keep riding it, but a couple of people who's opinion I trust advised me not to.

markie379

That sounds good to me I'll offer asking as long as the steerer has at least 240mm on it as measured from where the fork meets the head tube to the top of the steerer .

I recently got a bike fit and the steerer on the fork on my existing bike is a fraction too short

Is it a black fork?? Colour doesnt matter but White would be ideal:D

dooverylittle

markie379 wrote: »

That sounds good to me I'll offer asking as long as the steerer has at least 240mm on it as measured from where the fork meets the head tube to the top of the steerer .

I recently got a bike fit and the steerer on the fork on my existing bike is a fraction too short

Is it a black fork?? Colour doesnt matter but White would be ideal:D

Sorry its black, the same as the one linked at the start of the thread.
I will measure the steerer tonight.

dooverylittle

markie379 wrote: »

That sounds good to me I'll offer asking as long as the steerer has at least 240mm on it as measured from where the fork meets the head tube to the top of the steerer .

I recently got a bike fit and the steerer on the fork on my existing bike is a fraction too short

Is it a black fork?? Colour doesnt matter but White would be ideal:D

Sorry Markie. There is only 220mm left on the steerer.

markie379

No bother and Thanks for checking .that's exactly the same length as my existing fork steerer

dooverylittle

markie379 wrote: »

No bother and Thanks for checking .that's exactly the same length as my existing fork steerer

I thick they cut them all down to the same amount of spacers. I am not sure what you are going to do. There is not many options for 1 1/4inch forks. And the canyon ones are very expensive, I think I paid 360, you can nearly get a ultimate al frameset for that. I presume you considered fliping the stem?

markie379

I've flipped the stem and I'm about 1cm too low . It's the only measurement I'm out on. I wanted to try and get it as close to my other Bike as possible .

I tried canyon and the fork price is ridiculous .I might look at updating the frame maybe...

dooverylittle

markie379 wrote: »

I've flipped the stem and I'm about 1cm too low . It's the only measurement I'm out on. I wanted to try and get it as close to my other Bike as possible .

I tried canyon and the fork price is ridiculous .I might look at updating the frame maybe...

If you have a CI race licence you can get a few quid of a new frame from Canyon, good luck!

One last thought, you could look for a stem with a different angle, again though there isn't much choice in 1 1/4 inch.