551 eotech

facemelter

As above have a 551 eotech here .I got it recently off thermo used it once and decided that my face mask made it to difficult to use it easily. :rolleyes: it is in perfect condition and comes with the flip up covers as seen in pic and i'll throw in the element lense cover if i can find it.

pic

ris m203
a v2 gearbox
a g&p m120
a large type 9.6 ( would be looking for at least 2000maH )
can meet up in the killiney area and will also post if needed
will also consider other offers thanks for looking
P

Arkslippy

I've two large 8.4 id swap for and ill throw in 2 tan midcaps. they are a bit scratched up but feed flawlessly. (previous owner spread them)

Hareton

Any thing on these take your fancy?

http://www.boards.ie/vbulletin/showthread.php?threadid=2056625933

http://www.boards.ie/vbulletin/showthread.php?threadid=2056581815

facemelter

Arkslippy wrote: »

I've two large 8.4 id swap for and ill throw in 2 tan midcaps. they are a bit scratched up but feed flawlessly. (previous owner spread them)

sorry man i'm really looking for 9.6 , ive more 8.4's than you can shake a stick at ! thanks for the interest and the offer

facemelter

Hareton wrote: »

Any thing on these take your fancy?

http://www.boards.ie/vbulletin/showthread.php?threadid=2056625933

http://www.boards.ie/vbulletin/showthread.php?threadid=2056581815

yeah i'd be interested in the sig229.

and i also might be interested in the chest rig and the g&p hop up

Arkslippy

facemelter wrote: »

sorry man i'm really looking for 9.6 , ive more 8.4's than you can shake a stick at ! thanks for the interest and the offer

I've a 9.6 nunchuck too. its got a deans connector i can throw in.

facemelter

sorry man , im still using tamiya connectors and i'd need more than just a nunchuck for the eotech.

SOCOM

Got a Gaurder Revolution long shaft motor, more or less brand new if you like?

facemelter

interested in the motor saw it on your channel ! how does it compare to the x high tech ? just got one of those in the post , have yet to try it though ! , but have you anything else you could throw in with the motor ?

SOCOM

facemelter wrote: »

interested in the motor saw it on your channel ! how does it compare to the x high tech ? just got one of those in the post , have yet to try it though ! , but have you anything else you could throw in with the motor ?

Just put up a new video of the X high tech, turns out its a high torque motor, and its a power hungry animal!! Sweet motor though as to longevity who knows?! Still you cant beat that price, and I hooked it up to a 11.1 lipo!
I have £5 sterling in my paypal account I could send you? Or what exactly are you after?

facemelter

SOCOM wrote: »

Just put up a new video of the X high tech, turns out its a high torque motor, and its a power hungry animal!! Sweet motor though as to longevity who knows?! Still you cant beat that price, and I hooked it up to a 11.1 lipo!
I have £5 sterling in my paypal account I could send you? Or what exactly are you after?

didnt see that video yet sure for under 20 quid posted to my door can't be to bad ! i havent got around to using it in a gun long term yet just testing when i got it. maybe a metal tooth piston ? if you have one lying around ? I also need a pack of shims , just throwing out ideas but im open to all offers !

RichieDub_484

Ok so I have the following going up on a thread shortly if ya wanna trade on any of it for the scope..

Black Vest
Radio and throat mic
Aimpoint type Micro-T scope with low profile and high mount
OD leg panels X2
CB Leg panel with 3xmag pouch
Black Knee pads
Magpul AFG (rEAL) black
P90/UMP Mag pouches x 4,2 CB & black

FEW OTHER BITS AND BOBS..

facemelter

RichieDub_484 wrote: »

Ok so I have the following going up on a thread shortly if ya wanna trade on any of it for the scope..

Black Vest
Radio and throat mic
Aimpoint type Micro-T scope with low profile and high mount
OD leg panels X2
CB Leg panel with 3xmag pouch
Black Knee pads
Magpul AFG (rEAL) black
P90/UMP Mag pouches x 4,2 CB & black

FEW OTHER BITS AND BOBS..

i'd be interested in the radio and throat mic aswell as aimpoint micro t , would need to see pics though

RichieDub_484

it be one or the other mate, cos the M-T is approx the same price as the eotech... Anyways im posting a thead at the mo... let me know if yer interested...

SOCOM

facemelter wrote: »

didnt see that video yet sure for under 20 quid posted to my door can't be to bad ! i havent got around to using it in a gun long term yet just testing when i got it. maybe a metal tooth piston ? if you have one lying around ? I also need a pack of shims , just throwing out ideas but im open to all offers !

Dont have a full metal tooth piston, just a stock piston with a single metal tooth, but I do have an Ultimate bearing piston head literally new!

RichieDub_484

RichieDub_484 wrote: »

it be one or the other mate, cos the M-T is approx the same price as the eotech... Anyways im posting a thead at the mo... let me know if yer interested...

http://www.boards.ie/vbulletin/showthread.php?t=2056648009 stuff is on this thread

SOCOM

I have a stock, buffer tube and sling mount plus the motor

Let me know

facemelter

@ SOCOM sorry , i'd had no use for the stock , thanks anyway

facemelter

RichieDub_484 wrote: »

http://www.boards.ie/vbulletin/showthread.php?t=2056648009 stuff is on this thread

Let me mull it over for a bit , i'll let you know either way thanks for the offer

Arkslippy

Just thinking. i have a 10.8 3300 mah

if you'd want that and the 9.6 nunchuck or one of the big 8.4s.

Dan2448

I have an m203 ris

facemelter

Dan2448 wrote: »

I have an m203 ris

can i see pics ? am interested. do have any shells that you can include

facemelter

Arkslippy wrote: »

Just thinking. i have a 10.8 3300 mah

if you'd want that and the 9.6 nunchuck or one of the big 8.4s.

hmm tempted let me mull if over for a bit , 10.8 is a bit much and i dont want the gearbox to crap its pants ! :P

Dan2448

facemelter wrote: »

Dan2448 wrote: »

I have an m203 ris

can i see pics ? am interested. do have any shells that you can include

Cant get pics up fir a while but i will do as soon as i can
I have one shell works ok but one of the little holes is slightly damaged so bbs dont go in

Arkslippy

facemelter wrote: »

hmm tempted let me mull if over for a bit , 10.8 is a bit much and i dont want the gearbox to crap its pants ! :P

How about a couple of lipos. 7.4 1300mah ones. new.

facemelter

Dan2448 wrote: »

Cant get pics up fir a while but i will do as soon as i can
I have one shell works ok but one of the little holes is slightly damaged so bbs dont go in

hmm gimme a while to think about it . i'll need to see pics aswell but there is no rush
how many rounds does the grenade hold ? and is the launcher a long or short type ?

facemelter

Arkslippy wrote: »

How about a couple of lipos. 7.4 1300mah ones. new.

sorry man i have no way of charging lipos , im still using ni-mh batteries

Arkslippy

Battery charger is only 20 quid.

facemelter

sorry man thanks for the offer, i'll keep you in mind

facemelter

bump

facemelter

bump