Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

riello 40 boiler problem

  • 09-05-2012 7:55pm
    #1
    shocko1
    Registered Users, Registered Users 2 Posts: 1 ✭


    I have just had a fill of oil and bled my boiler. It started up using the 'boost' on the control unit. After 1 hour it stopped firing, as it should. When I hit boost again it did not fire. I checked the burner and noticed that the re-start button on the front of the burner was not lit. Pressing the button caused no response. I re-set the thermostat button on the front of the boiler, but also no response. The pump light is on and running. Is there some fuse in the control unit that could be blown?


Comments

  • #2
    Spear
    Moderators, Computer Games Moderators, Technology & Internet Moderators, Help & Feedback Category Moderators Posts: 25,757 CMod ✭✭✭✭Spear


    Try the heating forum instead:

    http://www.boards.ie/vbulletin/forumdisplay.php?f=1320


  • #3
    Dave__
    Registered Users, Registered Users 2 Posts: 9 ✭Dave__


    shocko1 wrote: »
    I have just had a fill of oil and bled my boiler. It started up using the 'boost' on the control unit. After 1 hour it stopped firing, as it should. When I hit boost again it did not fire. I checked the burner and noticed that the re-start button on the front of the burner was not lit. Pressing the button caused no response. I re-set the thermostat button on the front of the boiler, but also no response. The pump light is on and running. Is there some fuse in the control unit that could be blown?


    There is no fuse in the control box .....check that you have power going to it ..with a meter .......


Advertisement