Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Crank arm HELP

  • 04-02-2012 12:05pm
    #1
    Registered Users, Registered Users 2 Posts: 17


    Trying to change Truativ GXP bottom bracket, removed bolt on non drive side arm but struggling to get arm off.Am i missing something or should it just wiggle/lever off.Am afraid to apply too much force any advice appreciated .Thanks


Comments

  • Registered Users, Registered Users 2 Posts: 358 ✭✭Raymzor


    If its like mine you need to remove both hex head screws as the flat washer inside has a lip on it with stop the non drive side am coming off. i have shimano sora with external bb


  • Registered Users, Registered Users 2 Posts: 2,216 ✭✭✭Paul Kiernan


    realslow wrote: »
    Trying to change Truativ GXP bottom bracket, removed bolt on non drive side arm but struggling to get arm off.Am i missing something or should it just wiggle/lever off.Am afraid to apply too much force any advice appreciated .Thanks

    It should just pull off - see here


  • Registered Users, Registered Users 2 Posts: 17 realslow


    Thanks Guys

    Job done new bb installed. For any other non mechs interested to remove crank arm LEAVE 10mm bolt in place and undo inner 8mm against it this is the self extraction. Simple when you know how!. Thanks again.


Advertisement