Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Moisture in the attic

  • 28-12-2011 12:08pm
    #1
    Registered Users, Registered Users 2 Posts: 41


    I have always suffered moisture build up in the attic, but it has become very bad since i had the wall and attic insulated. It is most apparent in cold weather when the moisture droplets pool on drip constantly from the inside of the roof.

    I imagine the ventilation could be in proved but the eves do not appear to be blocked by the new insulation

    Any advice

    Thanks


Comments

  • Registered Users, Registered Users 2 Posts: 270 ✭✭liveandnetural


    could you post a picture of whats happining or a picture of the attic

    a few questions for you
    what age is the house
    what is the roof constructed of(slate tile )
    is there a roofing membrane ?
    any bathroom fans exaustiing warm moist air into the attic
    is you attic trap door well sealed


  • Registered Users, Registered Users 2 Posts: 267 ✭✭teepee


    ventalation of sure , as roof allway get calls in the hard frosty weather . to install vents in old roofs especially where there is sparkling felt used , or there its hard to get to the roof you could bore a 100mm hole at either end of the house at the galble end , allowing for the movement of air with a vent grill externaly with stainless steel fly mesh .
    Teepee .


  • Registered Users, Registered Users 2 Posts: 67 ✭✭AMG86


    Have a look at where the insulation ‘meets’ the roof. There should be a gap.


  • Closed Accounts Posts: 2,389 ✭✭✭Carlow52


    muganj wrote: »
    I have always suffered moisture build up in the attic, but it has become very bad since i had the wall and attic insulated. It is most apparent in cold weather when the moisture droplets pool on drip constantly from the inside of the roof.

    I imagine the ventilation could be in proved but the eves do not appear to be blocked by the new insulation

    Any advice

    Thanks

    from here:
    http://www.commercialconnections.co.uk/Content/building_standards/BS5250%20-%20Code%20of%20Practise%20for%20condensation%20in%20buildings.pdf

    <Pitched roofs with a large void above the insulation are subject to diurnal temperature cycles, particularly
    in clear, calm weather. On clear nights, radiation to the sky can cause the temperatures of the roof covering
    and of the underlay to fall to several degrees below those of outside air and of air in the loft. Condensation
    may then form on the underside of the covering and of the underlay.>

    The link is to the full BS5250 Code of practice for
    control of condensation
    in buildings
    well worth a close read


  • Registered Users, Registered Users 2 Posts: 41 muganj


    Apologies Live and Neutral for my delay in getting back to you

    what age is the house - 1996
    what is the roof constructed of(slate tile ) - Tiles
    is there a roofing membrane - Yes, Felt like
    any bathroom fans exaustiing warm moist air into the attic - Not any more !
    is you attic trap door well sealed - Yes

    It recently had the extra insultaion installed. It is musty up there all the time now.

    A 100mm hole through the cable ends if a big job. Would i achieve any air movement if i increased the number of vent holes in the fiscia board ?

    Thanks
    John


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 41 muganj


    I drilled a 4.5" hole in the Gable end wall and now there is nice fresh air up there.

    Be carefull drilling into the Cable end not to attempt this too close the apex as these blocks are more likely to come loose as they lack support

    John


Advertisement