shed prices

cattle man

hi everyone.

got a price today for a A frame shed which will be joined onto the back of another 3 bay slatted shed.

price is for:::

47ftx40ft.

including.

green corry sheeting not box profile.

two sliding door on either side.

everything full galvanised.

delivered and erected.

for 10500 euro including vat

woundering is this a good price:)

vanderbadger

cattle man wrote: »

hi everyone.

got a price today for a A frame shed which will be joined onto the back of another 3 bay slatted shed.

price is for:::

47ftx40ft.

including.

green corry sheeting not box profile.

two sliding door on either side.

everything full galvanised.

delivered and erected.

for 10500 euro including vat

woundering is this a good price:)

ya probably about right, i got one this summer, 63 x 30 for the same price

flatout11

sounds alright, what height and how far does the sheeting come down to

cattle man

flatout11 wrote: »

sounds alright, what height and how far does the sheeting come down to

hi flatout.

its 14ft to eve and will be sheeted down to 6 ft all around the shed apart from the side where it joins the other shed it will just be sheeted down to the gutter of the other shed.

farmerka

hi defo is right price but check quality of sheeting it could be big difference beetwen steel sheets up to 100% more for good quality

fepper

just wondering whats the best type of sheeting you would recommend,tegral? cos im getting a leanto roof re-sheeted and im getting 0.7mm and the fella that doing it is supplying the sheets,would defo want it lasting more than 10yrs

vanderbadger

fepper wrote: »

just wondering whats the best type of sheeting you would recommend,tegral? cos im getting a leanto roof re-sheeted and im getting 0.7mm and the fella that doing it is supplying the sheets,would defo want it lasting more than 10yrs

0.7 mm should be very good stuff, must of the sheds you see advertised are .55 or 0.6

stanflt

got this 47*68 with canapy and vented shetting erected for 10600+vat



Uploaded with ImageShack.us

Suckler

stanflt wrote: »

got this 47*68 with canapy and vented shetting erected for 10600+vat

Did that include all the concrete work or purely steel & sheeting?

dar31

grand shed stanflt
what will it be used for, and how much stock you think it will hold.

stanflt

dar31 wrote: »

grand shed stanflt
what will it be used for, and how much stock you think it will hold.

shed will hold 58 cubicles for heifer calves from 6months old plus-same size as the old shed beside it-
put a crush in between the two sheds for ai purposes- cubicles and crush area are 8inchs higher than feeding passage at front for scrapers going in different directions-old shed has slatted tank

concrete is costing 13500+vat scrapers 7500+vat cubicles and crush 5500inc vat mats 3000inc vat shed 10600+vat

works out about 800/cubicle inc crush and handling area
By stanflt at 2011-11-13


By stanflt at 2011-11-13

jeff greene

Thanks for the pics Stan, can you give the dimensions of the cubicles. I want to do something similar as heifers are straw bedded for the first winter now but would prefer cubicles.

€7.5k for scrappers, what did you get for this? Thanks

keep going

fepper wrote: »

just wondering whats the best type of sheeting you would recommend,tegral? cos im getting a leanto roof re-sheeted and im getting 0.7mm and the fella that doing it is supplying the sheets,would defo want it lasting more than 10yrs

are you sure its 0.7 ,buying some sheeting at the mo and its grant spec and o.6 at 2.90 ft metre cover,what price yours

fepper

its a all in price including labour and taking off old sheeting so not 2 sure how much the 0,7mm sheeting is per mtre it is,supposed to be doing job in 2 wks,if i see him b4 that i'll ask him price per mtre

bob charles

keep going wrote: »

are you sure its 0.7 ,buying some sheeting at the mo and its grant spec and o.6 at 2.90 ft metre cover,what price yours

Steel sheeting has gotten very expensive in the last few years whereas fibre cement has gotten allot cheaper. Have a shed going up in a few weeks with this stuff on it http:/www.svk.be/en/roof/corrugated_sheets_intro

renandstimpy

cattle man wrote: »

hi everyone.

got a price today for a A frame shed which will be joined onto the back of another 3 bay slatted shed.

price is for:::

47ftx40ft.

including.

green corry sheeting not box profile.

two sliding door on either side.

everything full galvanised.

delivered and erected.

for 10500 euro including vat

woundering is this a good price:)

Hi cattle man looking at building a similar shed to you in mayo over an existing tank 40 x 45 ft.
I will have to put in 2 internal walls and suspended passageway in it.
just wondering do you have contact details for the guy that quoted you for that shed migh give him a shout see if he is interested in pricing cheers .

cattle man

renandstimpy wrote: »

Hi cattle man looking at building a similar shed to you in mayo over an existing tank 40 x 45 ft.
I will have to put in 2 internal walls and suspended passageway in it.
just wondering do you have contact details for the guy that quoted you for that shed migh give him a shout see if he is interested in pricing cheers .

ya no bother sent it to you in a private message.:)

renandstimpy

Thanks cattle man , thats funny that same man was down to my father in law not more than a month ago to price a shed and he also done one over the road , small world must give him a call. thanks again for that .:)