Airsoft Clearout !! loads of stuff !!

facemelter

I have finally amassed so much Airsoft stuff that i'm not using that I think I need to get rid of some stuff !

Can put up pics if needed will try get some up later today
I am based in the south Dublin area i cant travel very far at the moment but i can post at buyers expense

ok here we go

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head
price 40 Euro Provisionally sold

2. have two m4 hop up units both metal and in working order 5 Euro each
3. tan butt cover for a crane stock 5 Euro
4. Ak hop up unit 5 Euro
5. Full metal m4 receiver upper is a vltor receiver and lower is standard m4 both black , has some scratches but other than that they are perfect 40 Euro Provisionally sold
6. Metal buffer tube for m4 5 Euro
7. M4 front sight post 5 Euro
8. Delta ring 5 Euro
9. Ak front end with imitation wood and metal barrel 10 Euro
10. Le stock 5 Euro
11. Dark earth pistol grip for an m4 10 Euro Provisionally sold
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05 4 Euro each Provisionally sold
13. lower metal frame for and m9 that has a rail for accessories (black) 15 Euro will also include the grip covers Provisionally sold
pics and more to come soon !!
would also be interested in mids for an ak or m4

more stuff added up now

14. long type motor in perfect condition (from a dboys scar) 10 Euro
15. Metal Ris system (black) for an M4 25 Euro
16. standard hand guard for and M4 (from a g&g m4) 10 Euro
17.black Pistol grip for an M4 4 Euro

18. 120 round m203 shell in full working order 20 Euro
19. 6 bearings for a 6mm gearbox shell 5 Euro
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP" 10 Euro
21. Two metal motor base plates for m4 pistol grips (one flathead and one hex) 5 Euro each or 8 Euro for both

22. Anti reversal latch for v2/3 gearbox (no idea where it came from sorry) 3 Euro
23. Two air nozzles for V2/3 gearboxes 3 Euro each
24. Tappet plate for a V2 gearbox 3 Euro
25. Version 3 gearbox shell (with selector plate) ( 6mm ) 5 Euro

stigmau5

any pics on m4 receiver the viltor one

facemelter

i will get them up tonight , only the upper receiver is vltor

stigmau5

no bother

elDiablo79

wud you sell the upper vltor on its own?

elDiablo79

offer asking for 1 ak inner barrel. is it 455mm?

S.E.A.L.s

I'll take these:

6. Metal buffer tube for m4
7. M4 front sight post
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05
13. lower metal frame for and m9 that has a rail for accessories (black)

What is the best price you could do for them with P&P included?

Also very interested in the stuff you have that's not listed yet, so would like these items held for me until you have everything listed if that's possible?

elDiablo79

SEALs_Ireland wrote: »

I'll take these:

6. Metal buffer tube for m4
7. M4 front sight post
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05
13. lower metal frame for and m9 that has a rail for accessories (black)

What is the best price you could do for them with P&P included?

Also very interested in the stuff you have that's not listed yet, so would like these items held for me until you have everything listed if that's possible?

slow down der buddy i offered asking on 1 ak barrel first

S.E.A.L.s

elDiablo79 wrote: »

slow down der buddy i offered asking on 1 ak barrel first

There is a min between our offers so we were typing at the sametime, there is no need to jump on people as most of us here do follow the rules so don't worry about it okay.

facemelter

elDiablo79 wrote: »

offer asking for 1 ak inner barrel. is it 455mm?

yup it is offer accepted , pm me when ready

facemelter

SEALs_Ireland wrote: »

I'll take these:

6. Metal buffer tube for m4
7. M4 front sight post
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05
13. lower metal frame for and m9 that has a rail for accessories (black)

What is the best price you could do for them with P&P included?

Also very interested in the stuff you have that's not listed yet, so would like these items held for me until you have everything listed if that's possible?

i'll do all of them (bar the ak barrel that been offered on) for 45 posted i'd prefer to sell these now and then put up more stuff later if that ok with you ?

facemelter

elDiablo79 wrote: »

wud you sell the upper vltor on its own?

em would prefer to sell together tbh but if no one is interested then yes i will sell seperatly but i'll get pics up first cause they have been requested

derek84

offer €35 on the m4 receiver

S.E.A.L.s

facemelter wrote: »

i'll do all of them (bar the ak barrel that been offered on) for 45 posted i'd prefer to sell these now and then put up more stuff later if that ok with you ?

If the €8euros on top of the asking prices is for registered post then its a deal, see where your coming from & would like to wait for the rest first.

Mister TETRA

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head

€35 collected?

Racing Hero

Mister TETRA wrote: »

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head

where u based?? offer 15 along with a brand new m4 high cap mag

facemelter

Racing Hero wrote: »

Mister TETRA wrote: »

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head

where u based?? offer 15 along with a brand new m4 high cap mag

sorry man not interested in high caps and 15 is too low but thanks for the interest

facemelter

Mister TETRA wrote: »

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head

€35 collected?

sorry, but if i dont get me asking i'll just keep it

derek84

well €35 for the m4 body

facemelter

SEALs_Ireland wrote: »

If the €8euros on top of the asking prices is for registered post then its a deal, see where your coming from & would like to wait for the rest first.

yeah sure i'll do that i'll put the rest up tonight

facemelter

derek84 wrote: »

well €35 for the m4 body

can you do 40 ??

Arkslippy

facemelter wrote: »

I have finally amassed so much Airsoft stuff that i'm not using that I think I need to get rid of some stuff !

Can put up pics if needed will try get some up later today
I am based in the south Dublin area i cant travel very far at the moment but i can post at buyers expense

ok here we go

1.Version two gearbox , in working order , this gearbox is made from all spare parts I had lying around it has
7mm bearings
metal bearing spring guide
Xyt gears with a clip on the sector gear to improve feeding
polycarb piston from a D boys m4
ported brass cylinder that has been drilled
the gearbox is rear wired
ported piston head
price 40 Euro

2. have two m4 hop up units both metal and in working order 5 Euro each
3. tan butt cover for a crane stock 5 Euro
4. Ak hop up unit 5 Euro
5. Full metal m4 receiver upper is a vltor receiver and lower is standard m4 both black , has some scratches but other than that they are perfect 40 Euro
6. Metal buffer tube for m4 5 Euro
7. M4 front sight post 5 Euro
8. Delta ring 5 Euro
9. Ak front end with imitation wood and metal barrel 10 Euro
10. Le stock 5 Euro
11. Dark earth pistol grip for an m4 10 Euro
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05 4 Euro each
13. lower metal frame for and m9 that has a rail for accessories (black) 15 Euro will also include the grip covers
pics and more to come soon !!
would also be interested in mids for an ak or m4

Hiya, ill offer 42 collected for the gearbox and the de m4 grip.

facemelter

Arkslippy wrote: »

Hiya, ill offer 42 collected for the gearbox and the de m4 grip.

ah gwan pm me when your ready

derek84

facemelter wrote: »

can you do 40 ??

ok so €40

facemelter

grand pm me when your ready

derek84

facemelter wrote: »

grand pm me when your ready

pm sent;)

facemelter

more stuff added

S.E.A.L.s

I'll take this for the asking price too:

17.black Pistol grip for an M4

& wait for the rest to be added later.

Irish airsofter 1994

Any spare gearbox parts v2/3 tell me what you have please and could you post some pics

facemelter

SEALs_Ireland wrote: »

I'll take this for the asking price too:

17.black Pistol grip for an M4

& wait for the rest to be added later.

no worries not much more stuff :rolleyes: i though i had more but i'll update the list now

facemelter

That the lot !!! never knew i had so much stuff lying around !:eek:

S.E.A.L.s

I'll take these for the asking prices too:

18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

Is there much more left?

Would really like another m203 shell or two

Irish airsofter 1994

Its alright have plenty of them myself

facemelter

SEALs_Ireland wrote: »

I'll take these for the asking prices too:

18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

Is there much more left?

Would really like another m203 shell or two

no thats the lot thank god !!

facemelter

SEALs_Ireland wrote: »

I'll take these for the asking prices too:

18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

Is there much more left?

Would really like another m203 shell or two

i'll post you all that stuff for 85 Euro via registered post
pm if this is acceptable

S.E.A.L.s

facemelter wrote: »

i'll post you all that stuff for 85 Euro via registered post
pm if this is acceptable

So I'm getting this lot:

6. Metal buffer tube for m4
7. M4 front sight post
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05 -1 x AK 455mm barrel = €12 for the rest
13. lower metal frame for and m9 that has a rail for accessories (black)
17.black Pistol grip for an M4
18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

With registered post that costs €15euros, making the total €85euros right?

facemelter

SEALs_Ireland wrote: »

So I'm getting this lot:

6. Metal buffer tube for m4
7. M4 front sight post
12. four inner barrels from a full size ak (2), m4 and cqb m4 all 6.05 -1 x AK 455mm barrel = €12 for the rest
13. lower metal frame for and m9 that has a rail for accessories (black)
17.black Pistol grip for an M4
18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

With registered post that costs €15euros, making the total €85euros right?

yeah thats right

S.E.A.L.s

facemelter wrote: »

yeah thats right

Okay, also I'm not after these now:

6. Metal buffer tube for m4
7. M4 front sight post
12. the AK barrel (not looking for an AK anymore), still want the two M4 barrels.

& is this:

17.black Pistol grip for an M4

for a 20mm rail or is it the one you'd put a motor in?

facemelter

its one you put a motor in

facemelter

sorry mate unless you offer asking its already been sold to arkslippy

S.E.A.L.s

Not after that one & was hoping it was for a rail, so he can have it.

So I'm still after these:

12. m4 and cqb m4 barrels that are 6.05
13. lower metal frame for and m9 that has a rail for accessories (black)
18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

With registered post & could you do the lot for €60euros including any Paypal fees?

facemelter

SEALs_Ireland wrote: »

Not after that one & was hoping it was for a rail, so he can have it.

So I'm still after these:

12. m4 and cqb m4 barrels that are 6.05
13. lower metal frame for and m9 that has a rail for accessories (black)
18. 120 round m203 shell in full working order
20 barrel extender with flash hider for an m4 with trades of "5.56 NATO MP"

With registered post & could you do the lot for €60euros including any Paypal fees?

sorry mate I've priced them all fairly and your looking for me to post them via registered post for 3 quid !!! i'd do 65 but that as low as i can go atm
also i dont do paypal atm so it'll have to be a postal order

S.E.A.L.s

facemelter wrote: »

sorry mate I've priced them all fairly and your looking for me to post them via registered post for 3 quid !!! i'd do 65 but that as low as i can go atm
also i dont do paypal atm so it'll have to be a postal order

That's fair enough so €65euros it is then, Paypal is the only way I pay & would you start an account with them?

Or is that asking too much

facemelter

SEALs_Ireland wrote: »

That's fair enough so €65euros it is then, Paypal is the only way I pay & would you start an account with them?

Or is that asking too much

can you do a postal order ?? that'd be really handy for me sorry bout being a pain its just im not a big fan of papal :rolleyes:

S.E.A.L.s

facemelter wrote: »

can you do a postal order ?? that'd be really handy for me sorry bout being a pain its just im not a big fan of papal :rolleyes:

Where are you based?

We maybe able to meet in person, as I travel a good bit.

facemelter

SEALs_Ireland wrote: »

Where are you based?

We maybe able to meet in person, as I travel a good bit.

based in south dublin near the blackrock area

josh68

hi offer 25e for the ak front end,2xm4 hopups,m4 standard handgard,ak hopup ..:):):D

facemelter

josh68 wrote: »

hi offer 25e for the ak front end,2xm4 hopups,m4 standard handgard,ak hopup ..:):):D

thats a bit low mate, the prices are fair especially on the ak front end could you possibly got to 30 + P&P ?? if you need to post that is , if not say 30 ?

S.E.A.L.s

facemelter wrote: »

based in south dublin near the blackrock area

I'll see how I'm fixed with travel & will get back to you soon if that's okay with yourself?

facemelter

SEALs_Ireland wrote: »

I'll see how I'm fixed with travel & will get back to you soon if that's okay with yourself?

thats perfect with me

facemelter

bump