lower down fps on m700p

skywalk

hello guys
just got myself a kj works m700p gas rifle have to say looks & feels like the real thing .
just one thing before i bring it gaming is how do i lower the fps . (Q) does the allen screw on the back of the bolt turn clock wise or anti clock wise (A) ?

.22 Lover

Where did you get the rifle from?

skywalk

i bought the rifle off boards .

.22 Lover

and how low do you want the fps? beacause i doubt someone would sell you a hot rifle on here and if they did make sure you report it.

skywalk

the allen screw wont move what so ever i just need to know which way it goes clock wise or anti clock wise . cos the guy i got it off never used it so i think it factory tight and maybe hot . so i want to make sure it at the 1 joule limit .

MonkeyGuy

Or it's a possibility that it was set to shoot under the joule and that the screw was loctited in so it can't be raised?

skywalk

how would i be sure of that as i don,t have a chrono machine to check before i go gaming .

Leftyflip

Bring it to a retailer, and they'll be more than happy to help you. Chrono and adjust it accordingly!

skywalk

thanks leftyflip . will do to be on the safe side thanks lads

skywalk

right i done a poor man,s chrono with a coke can and man it whent right through the two side made holes in the bottom and top so i recon its way over . but i cant get the allen screw to move in the bolt to adjust the fps . can anyone help :eek:

chris20

]http://www.youtube.com/watch?v=GD9g5UnU2qk

Southern Dandy

green gas will put it over the limit use 134a, you can strip the bolt and adjust the fps, think someone put up a link how to do it fairly straight forward.

skywalk

yes i know how to strip the bolt ! but the problem is i cant loosen the allen screw at the back of the bolt . it wont move what so ever it so tight . .

damagegt

Just use 134a gas and It should be fine.I had one of these and even with the fps dialed down as low as it could go it would still be over 328fps with green gas.Where you might have a problem is if it locked at the lowest setting and you use 134a ull might have a very low fps.

horgan_p

skywalk wrote: »

right i done a poor man,s chrono with a coke can and man it whent right through the two side made holes in the bottom and top so i recon its way over . but i cant get the allen screw to move in the bolt to adjust the fps . can anyone help :eek:

Ignore that "poor mans chrono" . may as well be called the "blind mans guess" for all its accuracy.
Take it to either a site or a retailer and get it chroned properly.Then at least you can get advice from other players on the site , or from the retailer themselves on your next plan of action.