Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Wanted: 27" or 700c Wheel

  • 20-10-2010 11:23am
    #1
    HappyHarry
    Registered Users, Registered Users 2 Posts: 350 ✭✭


    I'm re-building a 1980's Peugeot PH18 for my GF to commute on.

    I need a set of wheels for it. Rear spacing is 120mm. Will consider anything from single speed to 6-7 speed. Original wheels are 27" 6sp but brakes look like they will fit 700c so either will do.

    Anyone got anything suitable?

    Also need tires, chain, rear derailleur and shifter...


Comments

  • #2
    mayan
    Registered Users, Registered Users 2 Posts: 83 ✭✭mayan


    You sure you want 120mm? im surprised it isn't 126mm from that era

    If you do, then i have a set of old 700c mavic rims laced to a set of large flange cartridge bearing track hubs. The rear is 120mm and has a thread either side for fixed cog or single freewheel. They could do with a true up and the rims have seen better days but the hubs are in perfect nick and very shiny.


  • #3
    HappyHarry
    Registered Users, Registered Users 2 Posts: 350 ✭✭HappyHarry


    mayan wrote: »
    You sure you want 120mm? im surprised it isn't 126mm from that era

    If you do, then i have a set of old 700c mavic rims laced to a set of large flange cartridge bearing track hubs. The rear is 120mm and has a thread either side for fixed cog or single freewheel. They could do with a true up and the rims have seen better days but the hubs are in perfect nick and very shiny.

    I think you are right, I measured the dropouts without the back wheel and they were 122mm, so I assumed it was a 120mm, but the wheel probably springs them to 126mm.

    I'm may be interested in the wheels anyway - they should fit. How much are you looking for them?


  • #4
    mayan
    Registered Users, Registered Users 2 Posts: 83 ✭✭mayan


    50 quid?

    including freewheel, pm sent, send me an email address if you're interested and i can send on a photo.

    thanks


  • #5
    kumate_champ07
    Closed Accounts Posts: 7,150 ✭✭✭kumate_champ07


    I have a new 27" front wheel,
    Rigida AL-1320 double wall eyeleted rim laced to a Pelissier low flange hub, both rim and hub manufactured in france

    It has never been used but since it was built a few decades ago I had overhaul the hub, replaced the old grease with dura-ace grease so it's now better than new!


  • #6
    Beasty
    Administrators, Social & Fun Moderators, Sports Moderators Posts: 78,393 Admin ✭✭✭✭✭Beasty


    As per the rules, no deals via PM - they must be done in-thread, then you can finalise arrangements by PM

    Beasty


  • Advertisement
  • #7
    mayan
    Registered Users, Registered Users 2 Posts: 83 ✭✭mayan


    apologies beasty,
    i only sent a pm to get an email address for photos. will keep dealings on here.


  • #8
    mayan
    Registered Users, Registered Users 2 Posts: 83 ✭✭mayan


    still available harry
    if you're interested, then let me know.

    thanks


Advertisement