Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

multi-lnb bracket to fit Hirschmann 1m dish?

  • 01-08-2010 2:34pm
    #1
    Noreen1
    Closed Accounts Posts: 1,654 ✭✭✭


    Does anyone know where I can obtain a multi-LNB bracket for a Hirschmann 1M satellite dish?

    I spent ages putting the dish up yesterday, only to find that the existing LNB bracket is riveted in place, and the rivets have worked loose, for some reason. (The dish has been lying in my shed for a couple of years.)
    The end result is a signal that varies between 87% strength, 78% quality - and no signal lock at the least gust of wind.:mad: Dish elevation is set at 22.5 degrees, the wall mount worked perfectly on my old dish - so that leaves the LNB bracket suspect!!

    Standard multi-LNB brackets do not seem to fit, because the feed arm is very wide, at about 48mm - hence leaving too much "wriggle room" for an LNB bracket that fits a Triax dish, for example - even if I bolt it in place!

    Any advice would be appreciated - I've searched online for an LNB bracket for a Hirschmann dish - either single or multi-lnb - without success.

    Noreen


Comments

Advertisement