Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Mercedes clk200

  • 07-07-2010 7:49am
    #1
    irldr
    Closed Accounts Posts: 8 ✭


    Hi ,
    I drive a 2000 mercedes clk200 , but I can't find the diagnostic socket. Can anyone help.
    Regards
    irldr


Comments

  • #2
    irldr
    Closed Accounts Posts: 8 ✭irldr


    Found this diagnostic connector, it is located under the bonnet, on the left hand side ( passenger side ) under a black plastic cover. In the centre of the cover is a 1/2" nut which must be removed before removing the cover.:)


  • #3
    mercservices
    Registered Users, Registered Users 2 Posts: 81 ✭✭mercservices


    whats the problem with your car?
    .


  • #4
    irldr
    Closed Accounts Posts: 8 ✭irldr


    Hi,
    When I start the car in the morning, it sounds as if it's missing (only firing on 3 ) and when I pull off , there is no power. After 250 yards , I turn the engine off and back on again and everything is fine. Then at lunchtime the same thing happens and I let it warm up and turn it off and back on again. This leads me to believe the MAF is the problem, but I was going to try run the diagnostics on it tomorrow and see if I can come up with anything.
    regards
    irldr


  • #5
    irldr
    Closed Accounts Posts: 8 ✭irldr


    The resolution to the problem was to change the coil. There are 2 coils , 1 for plugs 1 and 3 and the other for 2 and 4. The coil for 1 and 3 was gone, so replaced tyhis and all was fine.:)


Advertisement