Mag issue :S

MagicIRL

I have a Mid-Cap AK74 mags and 1 (What I think is) a DBOYS AK74 High Cap.

My problem is that my mid-cap is constantly misfeeding bbs. (Its not a BB issue as Im using TNT BBs) I think the problem is the mag does not sit in the AK propperly. If I push the mag up into the AK it will continue to fire normally, But I cant be doing that every time I want to take a shot.

However, My High-cap sits and fires constantly with no problems. I just click it in, Pull the trigger and BBs start flying. How can I fix this Mid-Cap issue or is that a standard issue with Mid-Caps?

evilrobotshane

I've seen this with a CYMA AK-47. There's at least a couple of different airsoft types of AK mags, slightly different sizes with the bit that engages the catch in slightly different places. I think the solution is to try-before-you-buy with magazines; my mate who was having this issue with his CYMA gun got a bunch of King Arms mags which work just fine.

MagicIRL

Cheers for that. I did notice the Mid-Cap was slightly smaller then the High-Cap. Shame really. I'll sell them on boards so, Im sure someone out there could use them.

damagegt

Have you taken them apart and cleaned them.I was having the same trouble with my ak hi-caps .I just took them apart cleaned them out and they were fine.

goblin59

when i first used mid caps i found they didnt feed right either, the spring inside the mids can somtimes get tangled up in itself. i had to strip them to fix this. have you tried feeding only a few into the mag?

mafo

Use adhesive tape around the top of mag. Mid-Cap will not move during shooting