Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

[wanted V3 Cylinder]

  • 13-05-2010 10:28am
    #1
    Drachnien
    Registered Users, Registered Users 2 Posts: 706 ✭✭✭


    Right the story goes like this, i went to re-shim the gearbox in my aug and found out the cylinder had been drilled, so i need a replacement. I want to have it before I open the mechbox so I'm not really pushed on what one i get. if anyone has an old one from a an upgrade that'll do fine ... meet in Dublin city preferably.


Comments

  • #2
    DeBurca
    Registered Users, Registered Users 2 Posts: 9,752 ✭✭✭DeBurca


    You will also need a new main spring
    If the spring was sub 1Joule then there would have been no need to drill the cylinder
    Also I would suggest that the piston head will need replacing as the drilling will have created burrs on the inside of the cylinder that will probally have damaged both the piston O-ring and piston head


  • #3
    The_Joker
    Registered Users, Registered Users 2 Posts: 2,422 ✭✭✭The_Joker


    Oh the old driller killer still lives on!


  • #4
    Leftyflip
    Registered Users, Registered Users 2 Posts: 7,463 ✭✭✭Leftyflip


    Hey Drachnien,
    I've a cylinder here if you want it, yours for the measly price of a fiver.
    Can meet you in Dublin City Centre on Sunday or sometime next week if that's any good?
    Cheers,
    Ger.


  • #5
    Drachnien
    Registered Users, Registered Users 2 Posts: 706 ✭✭✭Drachnien


    thanks for the info, I have a spare spring for it and to be honest i''m expecting to have to replace the piston head (and possibly the piston too) but i'll work that out once I've cracked it.

    Lefty, I'll take you up on that offer, I can meet you on Sunday. To PM ?


  • #6
    Leftyflip
    Registered Users, Registered Users 2 Posts: 7,463 ✭✭✭Leftyflip


    Drachnien wrote: »
    thanks for the info, I have a spare spring for it and to be honest i''m expecting to have to replace the piston head (and possibly the piston too) but i'll work that out once I've cracked it.

    Lefty, I'll take you up on that offer, I can meet you on Sunday. To PM ?
    I'll PM you in a few!


  • Advertisement
Advertisement