lmb question

crossmolinalad

I have a sat receiver with dish and lmb from canal digital included viewing card bought in the Netherlands
At the moment i have a sky dish on the house and im not allowed to put on a second one
The sat receiver can handle a max of 4 lmb,s (have one)
Need to get the 3 astra sats so can i buy just two other lmb,s or do i need special ones
need 2 more lmb.s
a new dish with holder for 3 lmb,s
and a switch

The switch is this one going outside and from there with one cable inside??
Or do i have to bring in 3 cables inside
What would be the costs
Had two guys here around 360 euro to do this looks me to much
Can do the most of the job myself exepf the outlining of the disk
Someone in Mayo who can help me with this?

St Senan

You will need this http://satellite.ie/acatalog/80cm_Dish_by_Andrews_.html
this http://satellite.ie/acatalog/triax_multi_lnb_bracket.html
3 of these http://satellite.ie/acatalog/Titanium_.2DB_LNB.html
this http://satellite.ie/acatalog/hirschmann_wallmount.html
and this http://satellite.ie/acatalog/Diseq_4_way_switch_by_Johannson.html



Here is some installers based in Mayo http://www.goldenpages.ie/category_T...ty:Mayo-1.html

stevethesatguy

I suggest you get the Triax D88 dish, the Triax rail which can handle 4 LNBs, a 4 way diseqc switch, and 4 technomate or Icecrypt LNBs if you need them.

The LNBs are wired to the back of the dish and connected to the diseqc switch,
One cable is then run from the diseqc switch to your receiver,

Simple as that.