L96 TRIGGER BOX PROBLEM!!!!PLS HELP!!!!!!!!!!

outlawsniper

My l96 has not been working now for about 3 months......:mad::mad::mad::mad: I know the problem its the spring not catching the sear when i cock it back how do i ix it?????? OR where can i buy a new l96 trigger box

seamus-2k7

Turn it upside down and look behind the trigger. If the latch is down, push it back up.
You can always bring to a retailer to get fixed.

outlawsniper

latch? is the latch in the trigger box? bcause i think the problem is that the sear isnt catching the spring when i cock it back but ill look there..and where is an airsoft repair place i can bring my gun too i live in troy MI

Rogue-Trooper

outlawsniper wrote: »

latch? is the latch in the trigger box? bcause i think the problem is that the sear isnt catching the spring when i cock it back but ill look there..and where is an airsoft repair place i can bring my gun too i live in troy MI

There is a Michigan based airsoft forum that you could try: http://miairsoft.proboards.com/index.cgi. They seem to have a retailer section. This forum (Boards.ie), although frequented by many airsofters from abroad, is based in Ireland. We do have some excellent retailers who do repairs but I reckon the cost of flying over and back might just break the bank!;)

cirx08

sorry for diggin up an old thread but can anyone help me with a problem i have with me well l96, it brand new i fired 1 mag and then every time i c0ck the gun and pull the trigger nothing happens, this happened about a week ago so i brought it back to the shop and they fixed it, i have it back 1 day and it happened again :S , how can i fix this?

Dread-Lock

Nice necro, but anyway....

When you cock the rifle is the spring catching on the sear? e.g when you pull the bolt back does it go click and the spring stay compressed? Or does it feel as thought the spring is constantly pushing against the bolt?

If the spring is catching on the sear I'd say there is something wrong with the trigger mechanism.
If the spring isn't catching on the sear then there is something wrong with your sear.

But to be honest I'd just bring it back to the shop you got it from and either ask for a new gun or a repair that will last.

cirx08

it catches the sear and stays compressed, ye i might just bring it back and get a new one cause that the second time it happened to it and only after firing 1 mag

Dread-Lock

When you pull the trigger does the spring release?

cirx08

nope, it just stays cocked :S

Dread-Lock

Yeah then there's something obviously up with the trigger mechanism. As it's only brand new I'd bring it back.

Masada

Is it on safe? does the safety lever operate as its supposed to? it could also be that it just needs a slight adjustment to the trigger, usually nothing too serious with these guns.

kevinhalvey

i had the exact same problom when i took out the trigger box it was actually shattered in bits you will have to buy a new/secondhand one i got one off airsoft adverts for 15 euro works perfectly

cirx08

ye, i just checked that and it same problem, i just gona bring it back to the shop and get them to get me a new one :P thanks

FIX - ANYONE WITH THIS PROBLEM CHECK THE TRIGGER BOX AND SEE IF ITS BROKE