P90 midcaps now available

Skatedude

Lo all.
for those of you that use p90's . mid caps are now available, but still a bit hard to find in stock.
2 brands

http://www.silverbackairsoft.com/midcap.html

http://www.spartanimports.com/content/index.php?page=shop.product_details&flypage=shop.flypage&product_id=2541&category_id=53&manufacturer_id=0&option=com_virtuemart&Itemid=26

Craigsy

YAY!!! Bout time really, sick of having to choose between hicaps that don't really work and low caps that run out in no time

kdouglas

Excellent.

zero19

Craigsy wrote: »

YAY!!! Bout time really, sick of having to choose between hicaps that don't really work and low caps that run out in no time

The hi caps work fine once maintained properly...

Skatedude

high caps work fine if you use a good quality bb. i have 4 high caps which have nver jammed with excel bb's. but will jam with monster and some other brands.
But i have 4 mid caps on order as they are a lot easier to fill in the field with a spped loader instead of having to wind them.

Craigsy

zero19 wrote: »

The hi caps work fine once maintained properly...

What about getting a brand new one and winding it up only to find it kills itself after ten shots

zero19

Was that an acm high cap or a tm? I have four tm hicaps a year and a half now, they still work flawlessly

Craigsy

CA, took it apart but can't find anything wrong. It just doesnt work, hopefully those midcaps will be the answer to my prayers

Witcher

Craigsy wrote: »

CA, took it apart but can't find anything wrong. It just doesnt work, hopefully those midcaps will be the answer to my prayers

Well theres your problem right there:)

Craigsy

Yea i know, probably work better if i ran around with a bag of bbs in my hand and a garden hose as a feed tube

Skatedude

or you could just use a drum mag and a tripod on your p90 and use it as a support gunner:rolleyes:

Craigsy

Skatedude wrote: »

or you could just use a drum mag and a tripod on your p90 and use it as a support gunner:rolleyes:

hmmm i can see it now, P90, box mag, bipod, long barrel and silencer, and a sniper scope. makes you the most hated person on the field or your money back

Stercus Accidit

Don't forget to paint it tan.

Skatedude

k, got my agm mid caps, they are slightly transparent, just a shade darker then the normal highcaps, the spring is also removable so it can be cleaned or replaced if damaged, havent had time to skirmish yet due to injury.

Fallschirmjager

wow this is lucky i was just about to drop on 4 lo caps..

Craigsy

where did you get them from btw?

tonyj_mc

Have a look here they are the 150 round one, they are the ones skatedude linked at the first post silverback ones

http://www.airsoft-war4.com/details.php?pid=4674

Fallschirmjager

26 dollar each...i will pass for the moment...

Skatedude

i got mine from spartanimports, link at top of this post

sean.carolan100

Craigsy wrote: »

CA, took it apart but can't find anything wrong. It just doesnt work, hopefully those midcaps will be the answer to my prayers

I had the same problem - I took it apart and found that even though you were turning the winder loads, the part which feed the bb's up was moving very little because it could simply move away from the cogs on the winding wheel when it wanted.

Skatedude

the high caps simply dont work with some brands of bb's, i've never had an issue with excel bb's, but have founds a number of other brands that simply jam all the time